Q-Logic 8200 사용자 설명서
2–Configuring NIC
NIC TroubleShooting/Diagnostics
NIC TroubleShooting/Diagnostics
2-48
SN0054671-00 A
4.
Under Diagnostic Tests, select one or more check boxes indicating the
tests you want to run: Hardware Test, Register Test, Interrupt Test,
Loopback Test, and Link Test. (
tests you want to run: Hardware Test, Register Test, Interrupt Test,
Loopback Test, and Link Test. (
describes each test type.)
5.
Click Run Tests.
To run user diagnostics in the CLI:
Use QConvergeConsole CLI (qaucli), a unified command line utility, to manage
all QLogic adapter models, including running user diagnostics. The overall option
(-pr <protocol>) allows you to start the utility with a specific protocol type:
(-pr <protocol>) allows you to start the utility with a specific protocol type:
NIC, iSCSI, or Fibre Channel. If you do not specify a protocol, all protocols are
enabled by default.
enabled by default.
commands for selecting a protocol.
NOTE:
Only one test can run at a time. Multiple tests can run sequentially.
Table 2-3. Windows QConvergeConsole CLI—Selecting a Protocol in
Menu Mode
Command
Description
qaucli
Start QConvergeConsole CLI in interactive
mode
mode
qaucli -pr nic [options]
Issue NIC command line options
qaucli -pr iscsi [options] Issue iSCSI command line options
qaucli -pr fc [options]
Issue Fibre Channel and FCoE command line
options
options
qaucli -npar [options]
Issue NPAR command line options
Table 2-4. Windows QConvergeConsole CLI—Selecting a Protocol in
Legacy Mode
Command
Description
qaucli -nic [options]
Use NIC legacy command line
netscli [options]
Use NIC legacy command line
qaucli iscsi [options]
Use iSCSI legacy command line
iscli [options]
Use iSCSI legacy command line