Uniden bearcat ubc3500xlt 사용자 설명서

62

custom search range to lock or unlock by rotating the 
scroll control with pressing 

.

Set Hold Time - lets you set the amount of time 

to hold the custom search range during scanning. 
You can set Hold time from 0 to 255 seconds.

Notes: 

• If you select 0, the scanner then searches the 

entire range one time.

• The default setting is 2 seconds for each 

search range.

• The scanner moves to the next system or 

search range after the hold time expires, any 
current transmission ends, and the channel 
delay time expires.

You can change the way service search works for 
each service.

 

 

 

Search for ... 

 

 

Edit Service 

Select your setting, then press the scroll control.

• Set Delay Time This setting determines how 

long the scanner waits after a transmission ends 
before resuming quick search or Close Call 
operation. Select your setting, then press the 
scroll control.

Off The scanner resumes immediately when 

the transmission ends.

1-5 sec The scanner waits the set amount of 

time after the transmission ends before 
resuming.

• Set Attenuator This setting controls the 

attenuator for search operation. Select your 
setting, then press the scroll control.