Uniden bearcat ubc3500xlt 사용자 설명서

63

Off  The attenuator is off.
On     Reception is attenuated by about 25 dB.

Notes: 

• Turn on this setting if you are near other strong 

signal sources. Attenuation sometimes helps to 
reduce interference and desensitization that 
strong signals create.

• Search with Scan - sets whether the scanner 

includes the service search during scanning. 
If unlocked, the scanner first scans all selected 
systems, then searches the air service searches 
for the selected hold time (0-255 seconds).

Notes: 

• You can also lock and unlock a search range by 

pressing 

, selecting the search range then 

pressing + 

L/O.

• If you select 0, the scanner searches the entire 

range one time.

• The default setting is 2 seconds for each 

search range.

• The scanner moves to the next system or 

search range after the hold time expires, any 
current transmission ends, and the channel 
delay time expires.

Your scanner’s Auto Store feature lets you search for 
new frequencies in custom search ranges or within a 
service search range and stores the frequency into a 
conventional system automatically.

To store frequencies which is found during Auto Store, 
you must first select a system where the frequencies 
will be stored.