Honeywell automatic vent damper d896 사용자 설명서
PRODUCT DATA
® U.S. Registered Trademark
Copyright © 1997 Honeywell Inc. • All Rights Reserved
Copyright © 1997 Honeywell Inc. • All Rights Reserved
D896 Automatic Vent Damper
GENERAL
D896 Automatic Vent Dampers are used with atmospheric
type, gas-fired equipment to reduce home heating losses by
closing off the vent between heat cycles.
type, gas-fired equipment to reduce home heating losses by
closing off the vent between heat cycles.
FEATURES
•
4-wire plug receptacle.
•
Includes wiring harness on select models to fit plug
receptacle onto S86/S8600/S8610/S8620 /L7148/L8148
or Penn Baso G60 or G66.
receptacle onto S86/S8600/S8610/S8620 /L7148/L8148
or Penn Baso G60 or G66.
•
For use only on atmospheric type gas-fired furnaces
and boilers equipped with draft hoods.
and boilers equipped with draft hoods.
•
Applicable to direct spark ignition (DSI), intermittent
pilot (IP), hot surface ignition (HSI), and standing pilot
systems.
pilot (IP), hot surface ignition (HSI), and standing pilot
systems.
•
Ambient temperature range 32
°
F (0
°
C) to 150
°
F (65
°
C).
•
Requires dual automatic combination gas control
valve or two separate single function main gas valves.
valve or two separate single function main gas valves.
•
Interlock switch provides safe operation; burner fires
only with damper in open position.
only with damper in open position.
•
24V operation for easy, low-cost wiring.
•
Visual indicator shows damper position.
•
30-second nominal closing time for optimum energy
savings.
savings.
•
Quiet motor and relay.
•
Wiring harnesses available separately to fit a variety of
applications.
applications.
68-0186
Contents
Features .............................................................................. 1
Specifications ......................................................................
Specifications ......................................................................