Honeywell av8or 사용자 설명서

 
AV8OR User’s Guide                                                         Appendix 
 

Pub. No D200803000008         Page 7-7     Revision July 2008. 

© Honeywell International Inc. Do not copy without express permission of 

To configure the AV8OR to receive weather data from the KDR-610, 
perform the following steps: 

From the Aviation Main Menu, tap the 

 soft key to open the 

System Setup Menu. 
Highlight the Device Setup option and tap the SELECT soft key to 
show the Device and Port Setup page. 
On the Device and Port Setup page, the configuration steps are: 

• If 

the 

Position Source is set to Serial, it must be changed 

to Internal or Bluetooth since there is only one RS232 port 
available. 

•  Set the Weather Port to Serial. 

•  Set the Weather Type to “KDR-610”. When finished the 

Device and Port Setup page should look like Figure 7-2. 

 

 

 
The output of the KDR 610 is RS 422.  You must use an RS 422 
to RS 232 converter to change the KDR 610 differential outputs 
to the single ended levels that the AV8OR requires.  This 
converter is installed between the KDR 610 and the AV8OR. 
 
An RS 232 to RS 422 Converter can be purchased from Telebyte, 
Model 253 (www.telebyteusa.com).