Honeywell av8or 사용자 설명서
AV8OR User’s Guide Aviation Mode Operation
Flight Plan Function
Flight Plan Function
Pub. No D200803000008 Page 3-45 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
FLIGHT PLAN FUNCTION
VFR flight plans can be created in the AV8OR-XP when configured
to use the internal GPS.
to use the internal GPS.
Flight plans can also be created on a PC with the Jeppesen
FliteStar© PC application. Refer to the Chapter 7 Appendix section,
for more information on how to import a flight plan.
FliteStar© PC application. Refer to the Chapter 7 Appendix section,
for more information on how to import a flight plan.
The FLIGHT PLAN function is selected through the Aviation Main
Menu, as shown in Figure 3-7. Tap on the
icon to open the
Flight Plans page.
Creating New Flight Plan using the Virtual Keyboard
A maximum of 100 flight plans can be stored in the AV8OR. Each
flight plan can contain up to 99 WPTs. To create a new flight plan,
perform the following steps.
flight plan can contain up to 99 WPTs. To create a new flight plan,
perform the following steps.
Tap the
soft key on the Aviation Main Menu Page to show
the Flight Plan Index page. Initially, when no flight plans have been
stored, a blank screen is displayed, as shown in Figure 3-55.
stored, a blank screen is displayed, as shown in Figure 3-55.
Figure 3-55: Flight Plan - Index Page with no Flight Plan
The NEW FLIGHT PLAN line is highlighted. Tap on the NEW
FPLAN soft key to show the New Flight Plan page. In this page, you
can enter a WPT using the keyboard.
FPLAN soft key to show the New Flight Plan page. In this page, you
can enter a WPT using the keyboard.