Uniden wxi3077 사용자 설명서

다운로드
페이지 17
1
1
If...
try...
you don’t hear a dial tone
The display says 
Registration Failed
-
-
Making sure the handset is fully 
charged, then starting over from the 
beginning of this section.
so you can register it to a new base (see page 24 or the manual for the 
accessory handset).
Using Multi-Handset Features
To use the features in this section, you must have at least two cordless 
handsets.
Conference calling
When an outside call comes in, two handsets can join in a 
conference call with the outside caller. 
To join an ongoing call, press 
TaLk/fLash
 or 
spEakEr
.
To leave the conference call, hang up normally; the other handset 
remains connected to the call.
Privacy mode
You can prevent other handsets from joining a call. Start your call 
as usual, then press 
MEnU/sELECT
; the display shows 
Call Privacy
Press 
MEnU/sELECT
 again to turn privacy mode on (you’ll see    in the 
display). When you hang up, privacy mode turns off automatically.
As long you have privacy mode on, no other handsets can interrupt 
your call. To allow another handset to join the call, press 
MEnU/sELECT
 
twice to turn privacy mode off.
Call transfer
to…
Do this...
transfer a call
Press 
CLEar/inTErCoM
, then select the 
handset you want to transfer the call to 
(select All to page all the handsets). When 
the other handset accepts the call, you’ll be 
disconnected.
cancel a transfer and leave 
the call on hold
Press 
End
.
cancel a transfer and 
return to the call
Press 
TaLk/fLash
.
answer a call transfer page
Press 
CLEar/inTErCoM
. You can speak to 
the transferring handset.
To speak to the outside caller, press 
TaLk/fLash
.
1.
2.
Intercom call
Whenever the phone is in standby, you can make an intercom call 
between handsets without using the phone line.
You can make an intercom call from any handset, but only two 
handsets can be in an intercom call at any time.
If an outside call comes in during an intercom page, the phone 
sounds a tone and shows any received CID information. If another 
handset hasn't answered the page yet, the phone cancels the page 
to let you can answer the incoming call.
to...
Do this...
make an intercom page
Press 
CLEar/inTErCoM
, then select the 
handset you want to talk with (select All 
to page all handsets at the same time).
cancel a page
Press 
End
.
answer an intercom page
Press 
CLEar/inTErCoM
 or 
TaLk/fLash
.
leave an intercom call
Press 
End
.