Uniden wxi3077 사용자 설명서

다운로드
페이지 17
1
17
example), press 
rEdiaL/paUsE
 to insert a 2-second pause. You can 
insert as many pauses as you need, but each pause counts as one 
digit. Press 
MEnU/sELECT
 when you’re finished.
Retrieve your messages
When you have new messages, the voice message icon (   ) appears 
in the display, and the light at the top of the handset blinks. Press 
MEssagEs
 to dial the programmed access number for this handset.
Reset message waiting indicator
The voice message icon should disappear after you listen to all your 
new messages. If it doesn’t, you can reset it manually. 
With the phone in standby, open the menu and select Global 
Setup
Select VMWI Reset, then select Yes
The blinking light will turn off and     disappears.
Press 
End
.
Finding a Lost Handset
With the phone in standby, press 
find
 on the base. All the handsets will 
beep for 1 minute; to end the page, press 
find
 again or press any key 
on any handset.
eXPaNDING YoUr PHoNe
Compatible Accessory Handsets
Your base supports a total of six cordless handsets: the one that came 
with the base and up to five other compatible accessory handsets. The 
following accessory handsets are compatible with this phone:
DCX330 accessory handset with charger
DRX332 accessory handset with MULTIRANGE
TM
 charger
DWX337 waterproof accessory handset with water-resistant 
charger
Refer to the individual Owner’s Manuals for detailed information 
about each handset.
1.
2.
3.
4.
Setting Up MULTIRANGE Chargers
If you expand your phone system by purchasing a separate  
MULTIRANGE charger, you will have a separate manual discussing 
the charger in detail, including how it works, how to reset it, how 
to attach the wall mount bracket, etc.
Your base can support a total of 2 DRX332 MULTIRANGE chargers.
The MULTIRANGE charger extends the range of your base in all 
directions, including up and down. Each handset will automatically 
connect to the charger or the base, depending on which signal is 
stronger. 
To place a MULTIRANGE charger
Make sure you have a strong signal from the base (at least 3 bars 
in the handset display).
Put the charger at least 3 feet away from the base or any other 
MULTIRANGE charger. (If you put the charger on a different floor 
from the base, don't forget to allow 3 feet vertically, also.)
for more information, see the DrX332 owner’s manual.
Registering Handsets
The handset that came packaged with the base is already registered to 
the base for you.
However, if you purchase any accessory handsets separately, you must 
register the handsets to the base before you can use them. Handsets 
that aren’t registered display a Handset not registered message.
With the phone in standby, press and hold 
find
 on the base for 
about  seconds.
On the handset you want to register, press and hold 
#
 until the 
display says Handset Registering (about 2 seconds).  
After the handset displays Registration Complete (about 30 
seconds), press 
TaLk/fLash 
and make sure you get a dial tone.
1.
2.
3.