Uniden BCT15 사용자 설명서
61
Programming General Settings
[MENU]
Settings
F
Adjust Contrast
F
Select a level Level 1 to Level 15
F
Setting the GPS Format
[MENU]
Settings
F
Set GPS Format
F
These settings control how the scanner handles GPS input when you are using the
location-based functions.
location-based functions.
Set Pos Format
F
Select from Degrees, Minutes, Seconds — DDD°MM’SS.ss or Degrees in decimal
— DDD.dddddd
Set Time Format
F
Select between 12H or 24H
Set Time Zone
F
Select the time zone you are in relative to Greenwich Mean Time (GMT) or
Coordinated Universal Time (UTC) from +14.0H through 0.0H and then to
-14.0H in 0.5 hour steps. The Internet is a good source for a quick reference
Coordinated Universal Time (UTC) from +14.0H through 0.0H and then to
-14.0H in 0.5 hour steps. The Internet is a good source for a quick reference
chart.
Set Unit
F
Select between mile and km (kilometer)
Setting the BearTracker Options
Set Hold Time
This is the time that the scanner remains on a transmission while scanning a
BearTracker system until it begins to scan a new system.
BearTracker system until it begins to scan a new system.
[MENU]
Set Bear Tracker
F
Set Hold Time
F
Set the hold time, in seconds, between 0 and 255.
Use
to change the number position.