Uniden BCT15 사용자 설명서
72
Then, select the system type:
MOT TYPE 1 — Motorola Type I systems
MOT TYPE 2 — Motorola Type II systems
MOT TYPE 2 — Motorola Type II systems
EDCS WIDE/NARROW — EDACS Wide and Narrow systems
EDCS SCAT — EDACS SCAT systems
LT — LTR Systems
The scanner creates an empty system with a default name of System n x. Note
that “n” is a number that increments as you add new systems. The “x” on the right
side of the display is M for Motorola system, E for EDACS systems, and L for LTR
systems. After creating the system:
side of the display is M for Motorola system, E for EDACS systems, and L for LTR
systems. After creating the system:
1. Set the system-level settings in “Programming System Settings” that apply to
the type of system you selected.
2. Set up at least one site for the system as described in “Programming Sites” on
3. To scan specific channels, create one or more channel groups with channels
as described in “Programming Channel Groups.”
Programming System Settings
Each system name can be made of up to 16 characters. Abbreviate as necessary
to fit. For Motorola and EDACS Wide/Narrow systems, the system name only
appears in the scanner menu’s Program System listings. It is not shown during
scanning. For other systems, the system name alternates with the Channel group
when the scanner stops on a channel.
to fit. For Motorola and EDACS Wide/Narrow systems, the system name only
appears in the scanner menu’s Program System listings. It is not shown during
scanning. For other systems, the system name alternates with the Channel group
when the scanner stops on a channel.
The default system names include the following letter in the 16th position to
indicate the system type:
indicate the system type:
M = Motorola; E = EDACS; L = LTR; C = Conventional
Specifying the Correct System Type
In order for trunk tracking to work properly, you have to specify the correct system
type when you create the system. Here are some tips for selecting the correct
type:
type when you create the system. Here are some tips for selecting the correct
type:
Editing the System Name
MELCS