Uniden BCT15 사용자 설명서
74
[MENU]
Program System
F
Select a conventional system
F
Edit Sys Options
F
Set Startup Key
F
Select a startup key from 0-9 or select “.” for no startup key.
Notes:
• To unlock the system at startup, press and hold the selected startup key while
you turn on the scanner.
• The system Quick Key is also enabled.
• If you press a different key at startup, the system is locked out.
• If you do not assign the system a startup key, the system is not affected by any
key press during startup.
[MENU]
Program System
F
Select a conventional system
F
Edit Sys Options
F
Set Lockout
F
Unlocked — The system is scanned when its quick key is enabled.
Temporary L/O — The system is not scanned, even if its quick key is enabled.
Cycling power will remove the lockout.
Lockout — The system is not scanned, even if its quick key is enabled. You must
manually unlock the system.
[MENU]
Program System
F
Select a conventional system
F
Edit Sys Options
F
Set Hold Time
F
Set how long the scanner will remain scanning on this system before moving to the
next system (up to 255 seconds). Note that the scanner will scan all unlocked
channels at least one time, regardless of the system hold time setting.
next system (up to 255 seconds). Note that the scanner will scan all unlocked
channels at least one time, regardless of the system hold time setting.
Setting the Startup Key
C
Setting the System Lockout
C
Setting the System Hold Time
C