Uniden BCT15 사용자 설명서
75
Programming Your Scanner
[MENU]
Program System
F
Select a system
F
Edit Sys Options
F
ID Scan/Search
F
Sets whether the scanner only stops on talk groups you have programmed in (ID
Scan) or whether the scanner stops on any unlocked channel (ID Search).
Scan) or whether the scanner stops on any unlocked channel (ID Search).
[MENU]
Program System
F
Select a system
F
Edit Sys Option
F
Set Delay Time
F
This setting controls how many seconds the scanner waits after a transmission
ends before resuming scanning. Enter a value from 1-5 or Off, then press
ends before resuming scanning. Enter a value from 1-5 or Off, then press
F
.
Notes:
• The default setting is 2 seconds for each system.
• This setting applies to all channels within the system.
[MENU]
Program System
F
Select a Conventional system
F
Edit Sys Option
F
Set Data Skip
F
This setting controls whether the scanner automatically skips channels it identifies
as data. This includes channels with either no audio or a constant-level audio
source. If turned on, the scanner resumes scanning as soon as it detects the data
signal.
as data. This includes channels with either no audio or a constant-level audio
source. If turned on, the scanner resumes scanning as soon as it detects the data
signal.
[MENU]
Program System
F
Select a Conventional system
F
Edit Sys Option
F
Set LocationInfo
F
Setting ID Scan/ID Search
MEL
Setting Channel Delay Time
MELCS
Setting Data Skip
C
Setting Location Information
C