Insignia NS-RSW211 사용자 설명서

다운로드
페이지 21
12
Rocketboost™ Wireless Subwoofer
www.insigniaproducts.com
Setting the low pass filter
Setting the low pass filter lets you select the frequency range of the sound 
that your subwoofer will reproduce and amplify. Turning the knob 
counterclockwise to 80 Hz sets the subwoofer to reproduce frequencies 
lower than 80 Hz. Turning the knob clockwise to 150 Hz sets it to 
reproduce frequencies lower than 150 Hz. The best setting depends on 
the other speakers you are using with the subwoofer. If you are unsure of 
the best setting, set this at 150 Hz.
If you are using the subwoofer in wireless mode with a Rocketboost 
enabled AV receiver or soundbar (for example Insignia NS-AV511 or 
NS-SBAR/NS-SBAR-A), you don't need to set the low pass filter. These 
products send a pre-filtered audio stream to the subwoofer that is set to 
best match the frequency range of those products.
If you are using the subwoofer in wireless mode with 
Rocketboost-enabled Insignia TV models NS-32E859A11 or 
NS-42E859A11, set the low pass filter to 150 Hz.
Listening to music and setting the volume
To listen to music and set the volume:
1
Turn on your subwoofer and audio source. The power indicator LED on 
the subwoofer should light steadily. If it is blinking you need to rejoin 
the subwoofer to your Rocketboost hub device. See “Connecting your 
subwoofer for wireless mode” 
on page 11.
2
Play music or a movie that you can easily hear the bass sound on.
3
Start with the volume level of the sub at its maximum setting. If you 
are not hearing the audio that matches the music or movie you are 
playing, press the Next Souce button on the subwoofer until you can 
hear it. This is because Rocketboost receivers (including the 
Note
Some Rocketboost hub devices use an on-screen graphical user 
interface to assist with the joining process (for example, Insignia 
NS-AV511 AV Receiver and NS-32E859A11/NS-42E859A11 TVs). 
In this case follow the User Guide for those products to wirelessly 
join them to the wireless subwoofer.
Note
You must join the wireless subwoofer to your Rocketboost hub 
device. If you have mulitple Rocketboost devices, the hub may 
not be the Rocketboost sender that is connected to the audio 
source you want to use with your subwoofer. However, after 
joining the subwoofer to your hub device, your subwoofer will 
be able to connect to the sender you are using with the 
subwoofer.
NS-RSW211_11-0334_MAN_V1.fm  Page 12  Monday, May 9, 2011  7:01 PM