Netgear TA612V 사용자 설명서

c.  

Shortly after registration Ace will send you an email confirming your 
service has been activated. 

 

TROUBLESHOOTING 

If you have no dial tone, check the following: 
• 

Make sure the phone is plugged into the correct port on the Voice Adapter 

(line #1). 

• 

Make sure that you have an active broadband Internet connection by accessing 
a web page and checking your email. 

• 

Ensure that you have set up an account with Ace Communications Group and 

that you have received an email confirming that the account is active. 

 

TECHNICAL SUPPORT 

For detailed technical assistance please refer to the User Manual for the TA612V  

available at http://www.acecommunications.com.au/ta612v. 

 
 

 

 
 
 
 
 
 
 
 
 
MINIMUM SYSTEM REQUIREMENTS 

Before installing the NETGEAR TA612V Broadband Voice Adapter, please make 

sure that your computer system has the following:  

• 

Broadband Internet connection 
Note: If you have a broadband connection that requires PPPoE and you wish 

to use the TA612V as a router, refer to the User Manual for the TA612V  

available at http://www.acecommunications.com.au/ta612v. 

• 

Standard (Analogue) telephone 

 

INSTALLATION WHEN USING TA612V AS A ROUTER & VOICE ADAPTER  

This guide shows you how to set up your Broadband Voice Adapter as a Router when 
connecting it to a switch or single PC. 

 

1.  

SET-UP THE NETWORK CONNECTIONS 

a.  

Unplug the power cable for your modem. Make sure that you have 

turned your computer off and that you DO NOT plug in the TA612V 
voice adapter until instructed to do so. 

b. 

Connect your broadband modem into the Internet Port on the TA612V. 

c. 

Connect the Ethernet cable we provide into the Ethernet port on the 
TA612V. Connect the other end of this Ethernet cable into the Ethernet 

port on the PC or spare port on your switch. 

d. 

Connect a telephone to the TA612V Line 1 port. 

e. 

Power on the modem. Wait about two minutes for it to start up.  

 

2.  

THEN, INSTALL THE TA612V VOICE ADAPTER 

a. 

Plug the power cable into the TA612V Power port, and plug the other 

end into an electrical outlet. This turns on your TA612V Broadband 
Voice Adapter. You do not need to unplug it when not in use.