Netgear TA612V 전단

Smart Internet Phone Adapter

Add voice to your internet

There may be updates that need to be downloaded such as new
firmware or changer to your features. Do not interrupt the
registration process by unplugging the power or lifting the
receiver on your phone during the start-up process. Interruption
of the startup may result in interruption of service.

 

c.  The status light on the front of the TA612V will flash. 

 

  Wait five minutes before continuing.

12VDC, 1.2A
Power

Phone 2

Phone 1

Restore
Factory

Settings

PC

Internet

Power

Status

Internet

PC

Phone 1

Phone 2

Blink=Activity 

Ethernet: Green=100Mbps/Amber=10Mbps

 

a.   Plug the power cable into the TA612V Power port, and plug the other end 

 

  into an electrical outlet. This turns on your TA612V Smart Internet Phone 

 

  Adaptor. You do not need to unplug it when not in use.

 

b.  Check that the Power light        on the Smart Internet Phone Adaptor is 

 

  illuminated.  Wait at least  five minutes for the phone adapter to start up.

 

d.   If you have a DSL modem that requires PPPoE you need to set up  your 

 

  PPPoE  http://192.168.61.1/

 

      Log in using the username and password printed on the back of the TA612V. 

 

      After setup reboot your TA612V.

INSTALLATION GUIDE

Before installing the NETGEAR TA612V Smart Internet Phone Adaptor, 
please make sure that your computer system has the following:

• 

Broadband Internet connection via cable or DSL modem.

• 

Home analogue telephone with a single line.

 

a.   Unplug the power cable for your modem. Make sure that you have 

 

  turned your computer off and that you DO NOT plug in the 

 

  TA612V Smart Internet Phone Adaptor until instructed to do so.

 

b.  Disconnect the Ethernet cable from the back of your PC and then  

 

  plug it into the Internet Port on the TA612V

 

c.  Connect one end of the Ethernet cable we provide into the PC port 

 

  on the TA612V. Connect the other end of this Ethernet cable into 

 

  the Ethernet port on the computer.

 

d.   Connect a telephone to the TA612V Phone 1 port.

 

e.   Power on the modem. Wait about two minutes for it to start up. 

 

a)  Power up the computer.

 

b) Use a Web browser to go to the bbpglobal web site, 

 

  http://www.bbpglobal.com/netgear/

 

  Follow the instructions to setup your account. During this process, 

 

  you will be asked to provide your contact information, the serial  

 

  number and the MAC address of your TA612V, shown at the back 

 

  of your unit.

 

c)  Reboot your TA612V after registration.

 

d) After reboot, pick up your telephone handset and listen for a dial 

 

  tone. If you hear dial tone then you have finished installation and 

 

  may begin making calls.  For dialing instructions, see the Helpfule 

 

  Hints on this card. If you do not hear a dial tone, see 

 

  Troubleshooting. For more tips about troubleshooting, see the 

 

  User Manual.

 

e)  (Optional) You may also select a PSTN number to receive phone 

 

  calls. Please go to the following web site to select a PSTN number. 

 

  Please note there is an additional charge for this service. 

• 

If you experience any problems concerning the BBPGlobal service 

 

please contact our customer service on 1300 663 723 during office 

 

hours or send us an email to support@bbpglobal.com

• 

To manage your bbpglobal account online, go to 

http://www.bbpglobal.com 

 

and follow the BBPGlobal Login link. You can:

• 

Listen to voice mail online

• 

Forward your voice messages to email

• 

Check call details and account balance

• 

Recharge online

• 

Transfer credits to other bbpglobal accounts

• 

For further information regarding the use of BBPGlobal service, visit: 

 

• 

The LEDs for the Phone 1 and Phone 2 ports work as shown below:

 

   

Amber On:  

The phone is off the hook

 

   

Amber Fast Blink:  Not ready, registering to server.

 

   

Green On: 

Ready to use.

 

   

Green Blink:  

The phone is connected.

 

   

Off:  

The port is disabled or the power is off.