jetway 875pmaxr2a 사용자 설명서

다운로드
페이지 70
 
 
                                                                                                                                                                                                                                                                                                                                               
 
 
 
41
 
Reset Configuration Data 
Normally, you leave this field Disabled. Select Enabled to reset Extended System Configuration 
Data (ESCD) when you exit Setup if you have installed a new add-on and the system 
reconfiguration has caused such a serious conflict that the operating system can not boot.   
The settings are: Enabled and Disabled. 
Resource Controlled By 
The Award Plug and Play BIOS has the capacity to automatically configure all of the boot 
and Plug and Play compatible devices.    However, this capability means absolutely nothing 
unless you are using a Plug and Play operating system such as Windows95/98.  If you set 
this field to “manual”   
choose specific resources by going into each of the sub menu that follows this field (a sub 
menu is preceded by a “>”). 
The settings are: Auto(ESCD), Manual. 
IRQ Resources 
When resources are controlled manually, assign each system interrupt a type, depending on 
the type of device using the interrupt. 
Please refer to section 3-9-1 
PCI/VGA Palette Snoop 
Leave this field at Disabled.  The settings are Enabled, Disabled. 
 
3-10-1   IRQ Resources 
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software 
IRQ Resources 
Item Help 
    IRQ-3   assigned to              PCI Device 
    IRQ-4   assigned to              PCI Device    
    IRQ-5   assigned to              PCI Device   
    IRQ-7   assigned to              PCI Device   
    IRQ-9   assigned to              PCI Device   
    IRQ-10  assigned to              PCI Device   
    IRQ-11  assigned to              PCI Device   
    IRQ-12  assigned to              PCI Device   
    IRQ-14  assigned to              PCI Device 
    IRQ-15  assigned to              PCI Device   
 
 
 
 
  Menu Level >> 
 
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit  F1:General Help 
F5:Previous Values    F6:Optimized Defaults   F7:Standard Defaults