jetway 603tcr1c 사용자 설명서

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

 

absolutely nothing unless you are using a Plug and Play operating system such as 
Windows95/98.  If you set this field to “manual” choose specific resources by 
going into each of the sub menu that follows this field (a sub menu is preceded by a 
“>”). 
The settings are: Auto (ESCD), Manual. 

IRQ Resources 
When resources are controlled manually, assign each system interrupt a type, 
depending on the type of device using the interrupt. 

PCI/VGA Palette Snoop 
Leave this field at Disabled.  The settings are Enabled, Disabled. 

This section shows the Status of you CPU, Fan, Warning for overall system status.  
This is only available if there is Hardware Monitor onboard. 

   Show PC Health in Post         [Enabled] 
   Vcore                           1.91V  
    2.5V                           2.50V  
    3.3V                           3.40V   
      5V                           5.10V  
     12V                          11.95V 
   Current CPU Temp.              33°C/91°F     
   Current System Temp.           21°C/69°F   
   Current FAN1 Speed             5100 RPM 
   Current CPUFAN2 Speed           0                   

   

↑↓→←

 
Show PC Health in Post 
During Enabled, it displays information list below.  The choice is either Enabled or Disabled 

Current CPU Temperature/Current System Temp/Current FAN1,FAN2 Speed/Vcore/ 
Vtt/Vcc3.3/+5V/+12V/-12V/-5V (V) 
This will show the CPU/FAN/System voltage chart and FAN Speed.