jetway 603tcr1c 사용자 설명서

 
 
 
                                                                                                                                                                                                                                                                                                                                                         

 
 
 

 

 

You can set either supervisor or user password, or both of them.  The differences 
are: 
Supervisor password:  Can enter and change the options of the setup menus. 
User password: 

Can only enter but do not have the right to change the 
options of the setup menus.  When you select this function, 
the following message will appear at the center of the screen 
to assist you in creating a password. 

Type the password, up to eight characters in length, and press <Enter>.  The 
password typed now will clear any previously entered password from CMOS 
memory.  You will be asked to confirm the password.  Type the password again and 
press <Enter>.  You may also press <Esc> to abort the selection and not enter a 
password.   
To disable a password, just press <Enter> when you are prompted to enter the 
password.  A message will confirm that the password will be disabled.  Once the 
password is disabled, the system will boot and you can enter Setup freely. 

When a password has been enabled, you will be prompted to enter it every time you 
try to enter Setup.  This prevents an unauthorized person from changing any part of 
your system configuration.  
 
Additionally, when a password is enabled, you can also require the BIOS to request 
a password every time your system is rebooted.  This would prevent unauthorized 
use of your computer. 
 
You determine when the password is required within the BIOS Features Setup Menu 
and its Security option.  If the Security option is set to “System”, the password will 
be required both at boot and at entry to Setup.  If set to “Setup”, prompting only 
occurs when trying to enter Setup.