ge-interlogix simon 3 사용자 설명서
Simon Security System
13
Full Line Seizure
This method requires that the panel be wired ahead (or in front) of all other phones,
answering machines, computers, or any other devices on the phone line. This allows the
panel to take over (seize) the phone line, even if another device on the line is in use.
answering machines, computers, or any other devices on the phone line. This allows the
panel to take over (seize) the phone line, even if another device on the line is in use.
An RJ-31X (CA-38A) jack should be installed when wiring for full line seizure. This
lets the user quickly and easily disconnect the panel from the phone line in case the
panel disables the phone line due to a malfunction.
lets the user quickly and easily disconnect the panel from the phone line in case the
panel disables the phone line due to a malfunction.
Full Line Seizure Wiring with an RJ-31X
Note
For UL Listed systems, the
RJ-31X jack must be
mounted within 5 feet of the
panel.
For UL Listed systems, the
RJ-31X jack must be
mounted within 5 feet of the
panel.
1.
Run a 4-conductor cable from the TELCO block to the RJ-31X (A in Figure 8).
2.
Connect the 4-conductor cable wires to the RJ-31X (B in Figure 8).
3.
Disconnect the Green and Red premises phone jack wires from the TELCO block
and splice them to the 4-conductor cable Black and White (or Yellow) wires (C in
Figure 8). Use weatherproof wire connectors for these splices.
and splice them to the 4-conductor cable Black and White (or Yellow) wires (C in
Figure 8). Use weatherproof wire connectors for these splices.
4.
Connect the 4-conductor cable Green and Red wires to the TELCO block TIP (+)
and Red to RING (-) posts (D in Figure 8).
and Red to RING (-) posts (D in Figure 8).
Figure 8. Full Line Seizure Wiring with an RJ-31X
Full Line Seizure Wiring with 1 Premises Phone
Note
If the customer ever adds a
phone or other phone device
to another phone jack, full
line seizure no longer exists.
Inform the customer to con-
tact you if they want to add a
phone or other device so
that you can rewire for full
line seizure by adding an
RJ-31X.
If the customer ever adds a
phone or other phone device
to another phone jack, full
line seizure no longer exists.
Inform the customer to con-
tact you if they want to add a
phone or other device so
that you can rewire for full
line seizure by adding an
RJ-31X.
If a single phone is all that exists on the premises, full line seizure can be accomplished
without an RJ-31X.
without an RJ-31X.
1.
Disconnect the phone from the premises phone jack and plug it into the panel
PHONE jack (A in Figure 9). This jack is disconnected automatically whenever the
panel reports.
PHONE jack (A in Figure 9). This jack is disconnected automatically whenever the
panel reports.
2.
Connect the phone cord included with the panel to the panel LINE IN jack and the
premises phone jack (B in Figure 9).
premises phone jack (B in Figure 9).
H
W
IN
1
H
W
IN
2
E
B
BRN
GRY
GRN
RED
Bla
c
k
Gr
een
Re
d
Wh
it
e
(o
r Y
e
llo
w)
(+)
TIP
(-)
RING
Green
Red
Black
White (or Yellow)
D
A
C
Green
Premises
Phone Jack
Wires
Phone Jack
Wires
H
W
IN
1
H
W
IN
2
A
B
Lone Premises Phone
Premises
Phone Jack
Phone Jack
Figure 9. Full Line Seizure Wiring with 1
Premises Phone