Pentax ist d 작동 가이드
152
Appendix
8
Error Messages
Error Messages
Description
Memory full
The CF card memory is full, and no more images
can be saved.
Insert a new CF card or delete unwanted images.
(p.34, 102)
You may be able to save the image by changing the
quality level or recorded pixels.
(p.51, 52)
can be saved.
Insert a new CF card or delete unwanted images.
(p.34, 102)
You may be able to save the image by changing the
quality level or recorded pixels.
(p.51, 52)
No image
There are no images for playback on the CF card.
Camera cannot display this
image
You are trying to play back an image not supported
by this camera. You may be able to display this on
a PC or another brand of camera.
by this camera. You may be able to display this on
a PC or another brand of camera.
No card in camera
The CF card is not inserted in the camera. (p.34)
Battery depleted
The battery is exhausted. Install new batteries in the
camera. (p.23)
camera. (p.23)
Memory card error
The CF card has a problem, and image capture and
playback are impossible. Try displaying it on a PC.
playback are impossible. Try displaying it on a PC.
Card not formatted
The CF card inserted is not formatted, or has been
formatted on a PC or other device. (p.34)
formatted on a PC or other device. (p.34)
Cannot use card
The inserted card cannot be used. Insert a usable
card.
card.
Image folder could not be
created
The maximum folder and file number has been
used, and no more images can be saved. Insert a
new CF card or format the CF card. (p.114)
used, and no more images can be saved. Insert a
new CF card or format the CF card. (p.114)
Settings not stored
The CF card memory is full, and no more DPOF
settings can be made.
settings can be made.
Could not save image
The image could not be saved because of a CF card
error.
error.
Not enough battery remaining
to clean sensor
The battery is almost gone. Replace the battery with
a new one or use an optional AC adaptor.
a new one or use an optional AC adaptor.
Battery level is low
End cleaning
Battery became nearly depleted during Mirror Up.
End the CCD cleaning process. (p.149)
End the CCD cleaning process. (p.149)
e_000_kb321.book Page 152 Wednesday, August 27, 2003 12:09 PM