Panasonic KYB926SLEPG 작동 가이드

EN-

16

EN-

17

For smaller pans, place the cookware in one of the 

four positions shown.

For larger pans, place the cookware in one of the three 

positions shown.

 

Place it at the top or bottom edge of the flex cooking 

zone.

The front and rear areas of a flex cooking zone can 

be used independently of each other by selecting the 

necessary power for each one.

Do not place the cookware in an off-centre position. 

The sensor may not function properly and could cause 

a fire.

Flex Cooking Zone

The flex cooking zone consists of several independently-controlled inductors. When 

cookware is detected, only sections that are in contact with the cookware will be 

activated, all others will remain switched off.
To ensure that the cookware is detected and heat is distributed evenly, centre the 

cookware as shown below:

For Genius Sensor cooking, use either the upper or 

lower two sections of the flex cooking zone.

Place it at the top or bottom edge of the flex cooking 

zone.

Whilst cooking with the Genius Sensor, do not place 

the pan on the middle two sections of the flex cooking 

zone.