Panasonic KXTG9582 작동 가이드

– 11 –

By pairing a Bluetooth headset to the base unit, you can have a hands-free conversation wirelessly for 
landline calls.
L

1 headset can be paired to the base unit. However, only one Bluetooth device (cellular phone or headset) 
can be connected to the base unit at a time.

Your headset:
Set your headset to pairing mode.
L

Refer to your headset operating instructions.

{

MENU}(621

1 Pair using the handset or base unit.

2 Paring

If your headset PIN is “0000”, go to step 4. 
If your headset PIN is other than “0000”, press {CLEAR}, then enter your headset PIN.
L

Typically, default PIN is “0000”. Refer to the headset operating instructions.

Press {OK}, then wait until a long beep sounds. s {OFF}/{EXIT}
L

When the HEADSET indicator on the base unit lights up, the headset is available for use.

Operating a Bluetooth wireless headset using a landline (Base unit)
Refer to your headset operating instructions for headset operations.
N

Answering landline calls with your headset
To answer a landline call, turn on your headset referring to your headset operating instructions.
When you finish talking, turn off your headset referring to your headset operating instructions.

L

If you cannot hang up the call using your headset, press {s} on the base unit 2 times.

N

Switching between the base unit and your headset 
You can switch between the base unit and your headset:

 during a landline call with the base unit speakerphone.
 during an intercom call between the base unit and handset.
 while listening to messages recorded on the base unit answering system.

To switch to your headset:
Press {HEADSET} on the base unit.
To switch to the base unit:
Press {s} on the base unit.

2

1

TG958x_(en)_QG.fm  11 ページ  ２０１５年７月２２日　水曜日　午前１０時５４分