Panasonic KXTG9582 작동 가이드

– 12 –

Frequently asked questions

Question

Cause/solution

Why is _ displayed?

The handset is too far from the base unit. Move closer.

The base unit’s AC adaptor is not properly connected. Reconnect AC
adaptor to the base unit.

The handset is not registered to the base unit. Register it.

Handset: {MENU}(13)

Base unit: Press and hold {LOCATOR} for about 5 seconds.

Handset: Press {OK}, then wait until a long beep sounds.

Why am I unable to pair a cellular
phone to the base unit?

Depending on the compatibility of the cellular phone, you may not be
able to pair it to the base unit. For more information, please visit:
http://www.panasonic.com/link2cell

Confirm that the Bluetooth feature of your cellular phone is turned on.
You may need to turn this feature on depending on your cellular
phone.

Why is there no dial tone?
(cellular line)

Make sure that the CELL indicator lights up and the cellular phone is
connected to the base unit.

The cellular phone has not been paired to the base unit. Pair the
cellular phone.

How can I increase the handset
volume level?

Press the navigator key {^} repeatedly while talking.

Why is the conversation noisy or
cutting off?

Try to relocate the base unit so that distance to the handset is
minimized.

If the same problem occurs even if the handset is next to the base
unit, please visit: http://shop.panasonic.com/support

Can I add another accessory
handset to my base unit?

Yes, you can add up to 12 handsets (including the handset(s) sold
with your base unit) to a single base unit.

To purchase additional accessory handset(s) (KX-TGA950),
please visit: http://shop.panasonic.com/support
TTY users (hearing or speech impaired users) can call 1-877-833-
8855.

Can I keep the batteries charging
all the time?

You can leave the handset on the charger anytime. This will not harm
the batteries.

How can I answer a call waiting
call (2nd call)?

Press {CALL WAIT} when you hear the call waiting tone.

TG958x_(en)_QG.fm 12 ページ２０１５年７月２２日　水曜日　午前１０時５４分