Panasonic KXTGF375 작동 가이드
Answering a 2nd call
If you receive a call while talking on the phone,
the interrupt tone sounds (page 43) and the
2nd caller’s information is displayed if you
subscribe to Caller ID service (page 53).
the interrupt tone sounds (page 43) and the
2nd caller’s information is displayed if you
subscribe to Caller ID service (page 53).
Answering a 2nd call during a
landline call
landline call
1
Press MMENUN during a landline call.
2
MbN: “Hold” a MSELECTN
3
To answer the 2nd call:
Press MCELLN while the 2nd call is being
received.
Press MCELLN while the 2nd call is being
received.
4
To hang up the 2nd call and return to the
1st call (landline call), press MOFFN, then
press M
1st call (landline call), press MOFFN, then
press M
N.
Answering a 2nd call during a cellular
call
call
1
Press MMENUN during a cellular call.
2
MbN: “Hold” a MSELECTN
3
To answer the 2nd call:
Press M
Press M
N or MCELLN while the 2nd call
is being received.
4
*1 If you press MCELLN and the selection list
is displayed, select the desired cellular
line and press MSELECTN.
line and press MSELECTN.
Power backup operation
for landline
When a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power backup mode). This allows
you to make and receive landline calls using a
handset during a power failure. The base unit
will not perform any other functions. However,
some functions such as Caller ID and
phonebook are available only when using a
handset other than the handset supplying
handset temporarily supplies power to the
base unit (power backup mode). This allows
you to make and receive landline calls using a
handset during a power failure. The base unit
will not perform any other functions. However,
some functions such as Caller ID and
phonebook are available only when using a
handset other than the handset supplying
power to the base unit. You can program
“Power failure” and the default setting is
“Auto” (page 45).
Important:
R If a handset is not placed on the base unit
“Power failure” and the default setting is
“Auto” (page 45).
Important:
R If a handset is not placed on the base unit
when a power failure occurs, “Base no
power Press OFF” is displayed. After
pressing MOFFN on the handset, place it on
the base unit to start power backup mode.
power Press OFF” is displayed. After
pressing MOFFN on the handset, place it on
the base unit to start power backup mode.
R Power backup mode will not work if the
battery level of the power supplying
handset is or .
handset is or .
R Do not lift the power supplying handset
from the base unit during power backup
mode.
mode.
Panasonic Ni-MH battery
performance (supplied batteries)
during power backup mode
performance (supplied batteries)
during power backup mode
When the batteries are fully charged,
operating time of the handset in power backup
mode varies depending on usage.
– Continuous use of the handset in power
operating time of the handset in power backup
mode varies depending on usage.
– Continuous use of the handset in power
backup mode: 1.5 hours max.
– Continuous use of the handset other than a
handset in power backup mode: 2 hours
max.
max.
– Not in use in power backup mode: 2 hours
max.
Making calls during a power
failure
failure
n
When only 1 handset is registered:
1
Lift the handset and dial the phone
number.
number.
2
Within 1 minute, place the handset on
the base unit.
R Wait until speakerphone is turned
the base unit.
R Wait until speakerphone is turned
on automatically and the call is
made.
made.
3
When the other party answers the call,
keep the handset on the base unit and
talk using the speakerphone.
keep the handset on the base unit and
talk using the speakerphone.
4
When you finish talking, press MOFFN.
24
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls Using the Handset
TGF37x_OI(en-en)_0721_ver110.pdf 24
2015/07/22 13:32:26