Panasonic ERRZ10 작동 가이드

11

• Check that the blades are not damaged or deformed before use.

• Apply the oil to the trimmer before and after each use. 

(See page 12.)

• When you finish using the trimmer, turn it off.

• The appliance may not operate in an ambient temperature lower 

than approximately 0 °C.

• Make sure that the trimmer is turned off.

Hold the trimmer and push the 

blade with your thumb.

Fit the mounting hook (B) into the blade mounting (A) on the 

trimmer and then push in until you hear a click.





• Clean the trimmer and the blade after each use. 

(If not cleaned, the motion will become poor and the sharpness 

will worsen.)

• Remove the blade. (See this page.)

►

• Do not wash the appliance with water. 

Doing so may cause malfunction if put in water.

1. Clean the blade with running water.

• Rinse with water and shake up and 

down several times to remove the water.

2. Wipe off the water with a towel and let it 

dry naturally.

3. Apply the oil to the blade after drying. 

(See page 12.)

►

1. Brush off any hair trimmings from the 

main body and from around the blade.

2. Brush off the hair trimmings from the 

blade edge.

3. Brush any hair trimmings out from 

between the stationary blade and the 

moving blade while pressing down the 

cleaning lever (a) to raise the moving 

blade.

4. Apply the oil to the blade. 

(See page 12.)



ER-RZ10_EU.indb   11

2017/01/13   11:02:01