Panasonic nvvp33 작동 가이드
PROG/CHECK
PROG/CHECK
Checking the timer programme
!
Press PROG/CHECK,
the Timer recording menu appears.
the Timer recording menu appears.
!
Press PROG/CHECK again or EXIT
to quit the menu.
Playing back programmed recordings
!
Press PROG PLAY.
!
The device will rewind to the beginning
of the recording, and automatically start playing it
back.
of the recording, and automatically start playing it
back.
You can also play back programmed recordings
manually.
This function will not work if the tape has been
ejected after Timer Recordings have been
completed.
manually.
This function will not work if the tape has been
ejected after Timer Recordings have been
completed.
Automatic SP/LP selection
A: If, at the beginning of a timer programme, there is
not enough tape left to complete it, the SP/LP function
will automatically run the tape at LP speed. This
ensures that the entire programme will be recorded. If
the LP mode is not enough to ‘stretch’ the remaining
tape to fit, you will not be able to record all of the TV
programmes.
D It is not possible to automatically activate the EP
A: If, at the beginning of a timer programme, there is
not enough tape left to complete it, the SP/LP function
will automatically run the tape at LP speed. This
ensures that the entire programme will be recorded. If
the LP mode is not enough to ‘stretch’ the remaining
tape to fit, you will not be able to record all of the TV
programmes.
D It is not possible to automatically activate the EP
mode.
Changing or cancelling a timer programme
!
Press PROG/CHECK,
the Timer recording menu appears.
the Timer recording menu appears.
!
With
select the entry you would like to edit,
confirm with ENTER.
!
Modify entries with
and confirm with ENTER.
!
Press CANCEL/RESET to delete a recording.
Timer recording
PDC function
Programme Delivery Control adjusts the start and stop time
of a timer recording automatically to ensure the recording
starts and finishes in line with the programme broadcast.
This is useful when a programme over-runs the published
times.
The station must be transmitting PDC and the exact time
must be set for PDC to work. The VCR detects whether a
station is transmitting PDC only during the tuning process.
If PDC is introduced or discontinued by a station you will
need to re-tune the VCR before it becomes aware of this.
PDC transmissions are not currently nation-wide so please
check with your local broadcaster for more information.
Programme Delivery Control adjusts the start and stop time
of a timer recording automatically to ensure the recording
starts and finishes in line with the programme broadcast.
This is useful when a programme over-runs the published
times.
The station must be transmitting PDC and the exact time
must be set for PDC to work. The VCR detects whether a
station is transmitting PDC only during the tuning process.
If PDC is introduced or discontinued by a station you will
need to re-tune the VCR before it becomes aware of this.
PDC transmissions are not currently nation-wide so please
check with your local broadcaster for more information.
ON : The station transmits PDC signals. You must set the
timer to the time specified in the TV magazines.
- - - : The station does not transmit PDC signals. Try to
set the start and stop time such that the entire film
can be recorded even if a programme begins or
ends earlier or later than planned.
can be recorded even if a programme begins or
ends earlier or later than planned.
OFF: If you do not want to use the PDC signals, you can
turn them off.
29
PLAY MODE
PROG
PLAY