Panasonic nvvp33 작동 가이드
TIMER
Recording with VIDEO Plus+
If you do not wish to edit the Timer recording data activate timer mode
!
Press TIMER to activate the timer mode. The symbol appears on the VCR display.
Programming recordings with the VIDEO Plus+ function
The VIDEO Plus+ code simplifies entering programme information to record TV
and SAT programmes. The recording time may be slightly longer than the TV
programme.
The VIDEO Plus+ code simplifies entering programme information to record TV
and SAT programmes. The recording time may be slightly longer than the TV
programme.
!
Press VIDEO Plus+.
!
Enter the VIDEO Plus+ number ( to correct entry).
!
Confirm entry with ENTER. The Timer recording screen appears.
TIMER
D
If the device fails to recognise the TV station automatically, the [ - - ] indication
appears under the programme position (Pos).
The [ - - ] will also appear, when using VIDEO Plus+ to record from a Satellite
broadcast for the first time. For each satellite station, you will have to set the
Pos for the first time (for details see page 32).
appears under the programme position (Pos).
The [ - - ] will also appear, when using VIDEO Plus+ to record from a Satellite
broadcast for the first time. For each satellite station, you will have to set the
Pos for the first time (for details see page 32).
!
The TV station must be entered manually with
.
The VCR will store this information so it will not have to be entered again.
!
To edit Timer recording data press ENTER.
!
Select station
and use to set date.
!
Use
to set the date, week or day of week and use to set the start time.
!
Use
to change the start time and use to set the stop time.
!
Use
to change the stop time and use to set the tape speed.
!
Set the tape speed: A (Automatic), SP, LP, EP
use to set PDC.
(for automatic setting and PDC recording see page 29)
!
Press ENTER to confirm the settings.
!
Press TIMER to activate the timer mode.
Ensure that the video recorder symbol is displayed. The Timer Rec button on
the device also lights up if the function was not turned off.
the device also lights up if the function was not turned off.
D
The Timer Rec button blinks for 5 seconds if the timer is turned on and you try
to perform a function. Most buttons are blocked when the timer is turned on.
to perform a function. Most buttons are blocked when the timer is turned on.
VIDEO Plus+ and PlusCode are registered
trademarks of Gemstar Development
Corporation. The
trademarks of Gemstar Development
Corporation. The
VIDEO Plus+ system is
manufactured under license from Gemstar
Development Corporation.
Development Corporation.
To cancel the Timer recording Standby Mode see page 28.
Timer recording
1/3
Pos Date Start Stop
PDC
1 BBC1 31/12 10:30 11:30 SP ON
1 BBC1 31/12 11:30 12:30 SP ON
2 BBC2 31/12 12:30 13:30 SP OFF
- - - - - - - -/ - - - -: - - - -: - - - - - -
- - - - - - - -/ - - - -: - - - -: - - - - - -
- - - - - - - -/ - - - -: - - - -: - - - - - -
1 BBC1 31/12 11:30 12:30 SP ON
2 BBC2 31/12 12:30 13:30 SP OFF
- - - - - - - -/ - - - -: - - - -: - - - - - -
- - - - - - - -/ - - - -: - - - -: - - - - - -
- - - - - - - -/ - - - -: - - - -: - - - - - -
Video Plus+
:enter
: access
0 - 9
: correct
: exit
ENTER
EXIT
8 3 5 4 2 - - - -
VIDEO Plus+
31