Panasonic DMRES35V 작동 가이드

RQTV0136

[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
≥Follow steps 1 to 3 of “DVD Management”. (

≥Select “Top Menu” or “Title 1” from “Auto-Play Select” before finalizing 

the disc. (

You can play DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R or 
+R DL on compatible DVD players after finalizing it on this unit, effectively 
making it into a DVD-Video that complies with DVD-Video standards.
The menu you create with the unit can also be used on DVD players.

[4]

3, 4] to select “Finalize” and then press 

[5]

2] to select “Yes” and then press [ENTER].

[6]

2] to select “Start” and then press [ENTER]. 

≥Finalizing starts.
≥You cannot cancel finalizing.
≥A message appears when finalizing is finished.
Notes
≥Finalizing can take a few minutes or up to a maximum of 15 minutes, 

depending on the remaining space on the disc.
(

[-R]DL] [+R]DL] Finalizing can take up to 60 minutes.)

≥Do not disconnect the AC mains lead while finalizing. 

This can render the disc unusable.

[7]

Notes
≥When finalizing a high-speed recording compatible disc, it may take 

longer than displayed on the confirmation screen (approximately 4 times 
longer).

≥After finalizing

-

[-R] [-R]DL] [+R] [+R]DL] The disc becomes play-only and you can no 
longer record or edit it.

-

[-RW‹V›] Although DVD-RW (DVD-Video format) becomes play-only 
after finalizing, you can record and edit the disc after re-formatting it. 
(

- DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R or +R DL 

finalized on the unit may not be playable on other players depending on 
the condition of the recording.

- There is a pause of several seconds between titles and chapters during 

play.

- Titles are divided into about 5-minute chapters

¢

.

(

[-R]DL] [+R]DL] 8 minutes.)

¢

This time varies greatly depending on the condition and mode of
recording.

[-R]DL] [+R]DL] 

≥Follow steps 1 to 3 of “DVD Management”. (

DVD-R DL and +R DL discs have two layers of recordable surfaces on one 
side. This unit does not offer seamless recording between the two layers. 
Recording stops when space on the first layer is full. The first layer must 
be closed to start recording on the second layer. Closing the first layer 
makes it unavailable for recording (editing is still possible). You cannot 
cancel closing. Make certain before proceeding.

[4]

3, 4] to select “Close First Layer” and then 

[5]

2] to select “Yes” and then press [ENTER].

[6]

2] to select “Start” and then press [ENTER].

≥Closing the layer starts. You cannot cancel closing.
≥Closing a layer can take a few minutes or up to a maximum of 

30 minutes, depending on the remaining space on the disc.

Note
≥Do not disconnect the AC mains lead while closing. 

This can render the disc unusable.

[7]

∫ To confirm the layer you can record

You can confirm the remaining recording time on the layer you can record.

Notes
≥You cannot close the first layer when there are no recordings on it.
≥By closing the first layer, you can record or edit discs that have been 

recorded on the second layer by other equipment.

≤ minutes.

Preparation
≥Insert a disc (

≥Press [DRIVE SELECT] to select the DVD drive.

ENTER

RETURN

SELECT

RQTV0136.book  56 ページ  ２００６年４月１９日　水曜日　午後１時２８分