Panasonic DMR-ES30V 작동 가이드

VQT0P03

[1]

[2]

Press [ENTER]. 

[3]

2, 1] to move and change the items 

3, 4].

≥You may also use the numeric buttons to enter “Name”, “Date”, 

“Start”, “Stop”.

≥Name (Programme Position/TV Station Name)
≥Date

You can also make a daily or weekly programme.

≥Start (start time)/Stop (finish time)

The time increases or decreases in 30-minute increments if 
you hold the button.

≥

 (Recording mode) (

SP

,.LP,.EP,.A°

^--------------------------J

° Recording mode Auto Change Function (

l right)

You can also press [REC MODE] to change the recording 
mode.

[4]

Press [ENTER] when you have finished making 
changes.

≥“Invalid entry” is displayed when you enter the wrong item.

Re-enter the item.

≥Repeat steps 2–4 to programme other recordings.

[5]

, TIMER].

≥“

” lights on the VHS unit’s display.

The timer recording standby mode is activated on VHS. 
However, the unit may not be turned off automatically.
≥You can play or record any media on DVD even if the timer 

recording standby mode is activated on VHS.

≥Timer recording can be started whether the unit is turned on or off.

[6]

≥If the timer recording is started with keeping the unit turned on, 

the unit is not turned off automatically even after the timer 
recording is completed. You can turn the unit off during timer 
recording.

∫ To release the unit from recording standby

“

” goes out.

≥Be sure to press [

, TIMER] before the programme start time to 

put the unit on recording standby. Timer recording will work only if 

“

” is displayed.

∫ To cancel recording when recording has already begun

≥You can also press and hold [∫] on the VHS main unit for more 

than 3 seconds to stop recording.

Note
≥“

” flashes for about 5 seconds when the unit cannot go to timer 

recording standby (e.g., video cassette with no accidental erasure 
prevention tab or no video casette in the cassette compartment).

≥If the unit is not put in the timer recording standby mode at the 

latest 10 minutes before the programmed timer recording starting 

time, the “

” flashes on the unit display. In this case, press 

[

, TIMER] to put the unit in the timer recording standby mode.

During a timer recording performed in SP mode, this function 
automatically changes the recording mode if the unit determines that 
the remaining tape is insufficient to record the entire programme. If 
the remaining tape time is still not sufficient even in LP mode, the 
programme cannot be recorded to the end.

≥This function cannot change the recording mode to the EP mode 

for PAL system.

≥This function may not work correctly when you record programmes 

in NTSC system.

≥The tape length must be set correctly. (

≥Some tapes may not work correctly.
≥If the recording mode changes during a timer recording, some 

picture distortion occurs at the point.

≥Even when the unit is turned off, you can display the timer 

recording list by pressing [PROG/CHECK].

Preparation
≥Press [VHS].

[1]

[2]

3, 4] to select a programme.

[3]

¢, CANCEL] to delete, or press [ENTER] 

You cannot delete or change programmes that are currently 
recording.

[4]

3, 4, 2, 1] to change and press [ENTER].

≥To continue changing programmes steps 2–4.

[5]

≥“

” lights on the VHS unit’s display.

The timer recording standby mode is activated on VHS. 
However, the unit may not be turned off automatically.
≥You can play or record any media on DVD even if the timer 

recording standby mode is activated on VHS.

≥Timer recording can be started whether the unit is turned on or off.

[6]

≥If the timer recording is started with keeping the unit turned on, 

the unit is not turned off automatically even after the timer 
recording is completed. You can turn the unit off during timer 
recording.

For your reference
≥Programmes that failed to record are deleted from the timer 

recording list at 4 a.m. 2 days later. 

∫  Manual programming

Highlighted line is ready 
for programming.

M7620(GN).book  53 ページ  ２００５年５月２５日　水曜日　午後１２時２分