Panasonic KXTGF383 작동 가이드
Making cellular calls
Important:
R The unit can be used to talk on 2 lines at the
R The unit can be used to talk on 2 lines at the
same time (for example, 2 cellular lines, or the
landline and 1 cellular line).
landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with the
unit at the same time (for example, 2 cellular
lines, or the headset and 1 cellular line).
lines, or the headset and 1 cellular line).
R Before making calls, confirm that the
corresponding CELL indicator on the base unit
lights up (page 14).
lights up (page 14).
1
Dial the phone number.
R To correct a digit, press MCLEARN.
R To correct a digit, press MCLEARN.
2
Press MCELL 1N or MCELL 2N.
3
Lift the corded handset.
4
When you finish talking, place the corded
handset on the cradle.
handset on the cradle.
Note:
R While on a call, you can switch from the base
R While on a call, you can switch from the base
unit to the cordless handset as follows.
The call sharing mode must be on (page 43).
A Handset: MCELLN
The call sharing mode must be on (page 43).
A Handset: MCELLN
a MbN: Select the
desired cellular phone. a MSELECTN
*1 The call is taken when:
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular calls
– a specific line is set to make cellular calls
B Base unit: Place the corded handset on the
cradle. When the speakerphone is used, press
M N.
cradle. When the speakerphone is used, press
M N.
R During a conversation with the corded handset,
you can switch to the speakerphone by pressing
M N, then place the corded handset on the
cradle.
M N, then place the corded handset on the
cradle.
Adjusting the receiver or speaker volume
Press MDN or MCN repeatedly while talking.
Press MDN or MCN repeatedly while talking.
Note:
R The receiver or speaker volume you set is kept
R The receiver or speaker volume you set is kept
for each line (landline and cellular lines).
Making a cellular call using the redial list
The last 10 phone numbers dialed are stored in
the redial list (each 48 digits max.).
The last 10 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
MREDIALN
2
MbN: Select the desired phone number.
3
Press MCELL 1N or MCELL 2N, then lift the
corded handset.
corded handset.
Erasing a number in the redial list
1
MREDIALN
2
MbN: Select the desired phone number. a
MERASEN
MERASEN
3
MbN: “Yes” a MSELECTN
4
MEXITN
Making landline calls
1
Dial the phone number.
R To correct a digit, press MCLEARN.
R To correct a digit, press MCLEARN.
2
Lift the corded handset.
3
When you finish talking, place the corded
handset on the cradle.
handset on the cradle.
Note:
R You can also dial the phone number after lifting
R You can also dial the phone number after lifting
the corded handset.
R While on a call, you can switch from the base
unit to the cordless handset as follows.
The call sharing mode must be on (page 43).
A Handset: Press M
The call sharing mode must be on (page 43).
A Handset: Press M
N.
B Base unit: Place the corded handset on the
cradle. When the speakerphone is used, press
M N.
cradle. When the speakerphone is used, press
M N.
Using the speakerphone
1
During a conversation with the corded
handset, press M N to turn on the
speakerphone.
R You can place the corded handset on the
handset, press M N to turn on the
speakerphone.
R You can place the corded handset on the
cradle.
R Speak into the base unit microphone.
2
When you finish talking, press M N.
Note:
R To switch to the receiver, lift the corded handset.
R To switch to the receiver, lift the corded handset.
Making a call using the redial list
The last 10 phone numbers dialed are stored in
the redial list (each 48 digits max.).
The last 10 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
MREDIALN
2
MbN: Select the desired phone number.
3
Lift the corded handset.
24
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls Using the Base Unit
TGF380_TG590SK(en-en)_0907_ver201.pdf 24
2016/09/07 12:38:11