Panasonic DMC LX 3 작동 가이드

VQT1T39

∫ Select the film you would like to use with [MULTI FILM]
1

Press 2/1 to select [MULTI FILM], and then press 4.

Press 3/4 to select multifilms 1 to 3 and press 2/1 to pick 
out the films you wish to use as the multifilms.
•

One press of the shutter button automatically records the picture to 

a selected number of films (up to a maximum of three films).

In film mode, the camera may do something equivalent to pull processing or push processing to 

create a picture with particular characteristics. The shutter speed may become very slow at this 

time.

Noise may become visible when you take pictures in dark places. To avoid picture noise, we 

recommend setting [NOISE REDUCTION] towards [_] or setting the items except 

[NOISE REDUCTION] towards [`] to take pictures.

When you adjust the film mode, film mode name is displayed in orange on the LCD monitor.

Set the number of pixels. The higher the numbers of pixels, the finer the detail of the 
pictures will appear even when they are printed onto large sheets.
Applicable modes:

 

∫ When the aspect ratio is [4:3].

¢ This item cannot be set in the Intelligent auto mode.

[_]

Increases the difference between the brightness and the 

darkness in the picture.

[`]

Decreases the difference between the brightness and the 

darkness in the picture.

[_]

The picture is sharply defined.

[`]

The picture is softly focused.

[_]

The colours in the picture become vivid.

[`]

The colours in the picture become natural.

[_]

The noise reduction effect is enhanced. Picture 

resolution may deteriorate slightly.

[`]

The noise reduction effect is reduced. You can obtain 

pictures with higher resolution.

@

 [PICTURE SIZE]

3648k2736 pixels

¢

3072k2304 pixels

2560k1920 pixels

2048k1536 pixels

¢

1600k1200 pixels

640k480 pixels

EB-DMC-LX3_eng.book  78 ページ  ２００８年７月１４日　月曜日　午後７時３８分