Panasonic DMC LX 3 작동 가이드

VQT1T39

If a RAW picture is recorded with the built-in memory, it will take time to write the picture data.

If you delete a RAW file from the camera, the corresponding JPEG image will also be deleted.

Refer to 

P145

 for information about the number of recordable pictures.

You can enjoy more advanced picture editing if you use RAW files. You can save RAW files in a 

file format (JPEG, TIFF etc.) that can be displayed on your PC etc., develop them and edit them 

using the software “SILKYPIX Developer Studio” by Ichikawa Soft Laboratory on the CD-ROM 

(supplied).

[

] gives a smaller data size for the same file than [

] or [

].

The following functions are available when the quality is set to [

], [

] or [

].

[CALENDAR]

[ROTATE]

[PROTECT]

The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the 
movement of the subject and brightness of the scene to minimise the jitter of the subject.
Applicable modes: 
[OFF]/[ON]

Refer to 

P50

 for the flash range.

Depending on the brightness and how fast the subject is moving, jitter may not be avoided.

Movements may not be detected when a moving subject is small, when a moving subject is at 

the edge of the screen or when a subject has moved at the very moment when the shutter 

button was pressed fully.

The maximum ISO sensitivity will be set to the value set in [ISO LIMIT SET] when set to [ON]. 

When the [ISO LIMIT SET] is set to [AUTO], it will be set automatically within the range up to 

[ISO800] depending on the brightness.

This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure 
enables pictures to be taken even in dark places without the resulting pictures coming out 
dark.
Applicable modes: 
[AUTO]/[80]/[100]/[200]/[400]/[800]/[1600]/[3200]

When setting to [AUTO], the ISO sensitivity is automatically adjusted to a maximum of value set 

with [ISO LIMIT SET].

ISO sensitivity will adjust automatically depending on brightness within the maximum setting of 

[ISO400] ([ISO1000] when the flash is used) when [AUTO] is selected for [ISO LIMIT SET].

 [INTELLIGENT ISO]

>

 [SENSITIVITY]

Recording location 

(recommended)

When it is light (outdoors)

When it is dark

Shutter speed

Slow

Fast

Noise

Less

Increased

EB-DMC-LX3_eng.book  80 ページ  ２００８年７月１４日　月曜日　午後７時３８分