Panasonic DPMB300EU 작동 가이드
8. Programmable Features
57
Setting the recording paper
size in the standard input tray
{#}{
size in the standard input tray
{#}{
3}{8}{0}
{
1} “
LETTER”: Letter-size paper
{
2} “
A4” (default): A4-size paper
{
3} “
LEGAL”: Legal-size paper
Setting the recording paper
size in the lower input tray
{#}{
size in the lower input tray
{#}{
3}{8}{2}
This feature will be displayed only when the lower input tray is installed (page
74).
{
74).
{
1} “
LETTER”: Letter-size paper
{
2} “
A4” (default): A4-size paper
{
3} “
LEGAL”: Legal-size paper
Setting the recording paper
type
{#}{
type
{#}{
3}{8}{3}
{
1} “
PLAIN PAPER” (default): 75 g/m
2
to 90 g/m
2
paper.
{
2} “
THIN PAPER”: 64 g/m
2
to 75 g/m
2
paper.
{
3} “
THICK PAPER”: 90 g/m
2
to 165 g/m
2
paper.
Note:
L
This setting is valid for both the standard input tray and the lower input tray.
L
“
THICK PAPER” will not be displayed if any of the paper input tray settings
are changed to “
#2” or “#1+#2”:
–
fax (feature #440 on page 62).
–
copy (feature #460 on page 63).
–
PCL
®
(feature #760 on page 64).
–
scan to email print feature (feature #565 on page 69).
Setting the waiting time for
the power save mode
{#}{
the power save mode
{#}{
4}{0}{3}
To set the length of time before the unit enters power save mode.
{
{
1} “
5min”: 5 minutes
{
2} “
15min” (default): 15 minutes
{
3} “
30min”: 30 minutes
{
4} “
1h”: 1 hour
Note:
L
When in power save mode, the unit needs to preheat the fuser unit before
it can begin printing.
it can begin printing.
Holding the previous contrast
setting
{#}{
setting
{#}{
4}{6}{2}
{
0} “
DISABLED” (default): Deactivates this feature.
{
1} “
ENABLED”: The unit will hold the previous setting.
Note:
L
The previous setting will be held individually for copying.
L
The previous setting will be held individually for sending faxes.
Setting the default operation
mode
{#}{
mode
{#}{
4}{6}{3}
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{
(feature #464) passes.
{
1} “
COPY” (default): Copy mode is selected as default.
{
2} “
FAX”: Fax mode is selected as default.
Note:
L
You cannot select the scan mode using this feature.
Setting the default operation
mode timer
{#}{
mode timer
{#}{
4}{6}{4}
To set the timer before returning to the default operation mode (feature #463).
{
{
0} “
OFF”: Deactivates this feature.
{
1} “
30s”: 30 seconds
{
2} “
1min” (default): 1 minute
{
3} “
2min”: 2 minutes
{
4} “
5min”: 5 minutes
Setting toner save feature
{#}{
{#}{
4}{8}{2}
{
0} “
OFF” (default): Deactivates this feature.
{
1} “
ON”: The toner cartridge will last longer.
Note:
L
This feature may lower the print quality by reducing toner consumption.
L
This setting is valid for copying, and when the unit automatically prints
reports/lists.
reports/lists.
L
This setting is invalid for printing received faxes.
Feature/Code
Selection