Panasonic DPMB300EU 작동 가이드
8. Programmable Features
64
8.5 PC print features
Feature/Code
Selection
Setting the paper input tray in
PCL
{#}{
PCL
{#}{
7}{6}{0}
This feature will be displayed only when the lower input tray is installed (page
74).
{
74).
{
1} “
#1” (default): Standard input tray
{
2} “
#2”: Lower input tray
{
3} “
#1+#2”
Note:
L
To select “
#2”, select “PLAIN PAPER” or “THIN PAPER” for the recording
paper type setting (feature #383 on page 57).
L
To select “
#1+#2”,
–
select the same paper size for the standard input tray (feature #380 on
page 57) and lower input tray (feature #382 on page 57). If either is
changed, “
page 57) and lower input tray (feature #382 on page 57). If either is
changed, “
#1” will be selected automatically.
–
select “
PLAIN PAPER” or “THIN PAPER” for the recording paper type
setting (feature #383 on page 57).
Setting the number of copies
in PCL
{#}{
in PCL
{#}{
7}{6}{2}
1. {
Y} i {#}{7}{6}{2} i {OK}
2. Enter the number of copies from “
001” to “999”, using the dial keypad.
L
The default setting is “
001”.
3. {OK} i {
Y}
Setting the recording paper
size in PCL
{#}{
size in PCL
{#}{
7}{6}{3}
{
1} “
LETTER”: Letter-size paper
{
2} “
A4” (default): A4-size paper
{
3} “
LEGAL”: Legal-size paper
Setting the image reduction
feature in PCL
{#}{
feature in PCL
{#}{
7}{6}{4}
{
0} “
OFF”: Deactivates this feature.
{
1} “
ON” (default): The document resolution will be automatically reduced
when the data size is too large to print.
Note:
L
This feature may lower the print quality by reducing the resolution.
Setting the recording paper
direction in PCL
{#}{
direction in PCL
{#}{
7}{6}{5}
{
1} “
PORTRAIT” (default): The document will be printed in portrait direction.
{
2} “
LANDSCAPE”: The document will be printed in landscape direction.
Setting the A4 wide feature in
PCL
{#}{
PCL
{#}{
7}{6}{6}
You can change the margin and printable area of A4-size recording paper so
that 80 characters in 10 cpi font may be printed on a line.
{
that 80 characters in 10 cpi font may be printed on a line.
{
0} “
OFF” (default): Deactivates this feature.
{
1} “
ON”: The margin and printable area of A4 recording paper will be changed.
Setting the lines per page in
PCL
{#}{
PCL
{#}{
7}{6}{7}
To set the number of lines per page in PCL printing.
1. {
Y} i {#}{7}{6}{7} i {OK}
2. Enter the number of lines per page from “
005” to “128”, using the dial
keypad.
L
The default setting is “
064”.
3. {OK} i {
Y}
Setting the font source in PCL
{#}{
{#}{
7}{6}{8}
This feature is available when the downloaded font is registered to the unit.
{
{
1} “
RESIDENT” (default): The document will be printed using resident font.
{
2} “
DOWNLOAD FONT”: The document will be printed using download font.