Panasonic DPMB300EU 작동 가이드
9. Useful Information
73
9.2 Status of the unit
9.2.1 Using Remote Control
You can easily operate the following functions from your
computer.
–
computer.
–
Programming the features (page 55)
–
Storing, editing or erasing items in directories (page
44)
44)
–
Storing or erasing items for broadcast transmission
(page 46)
(page 46)
–
Viewing items in the journal report (page 43)
–
Saving the journal report to your computer
1
Start Multi-Function Station. i [Remote Control]
L
The [Multi-Function Remote Control] window
will appear.
will appear.
2
Select the desired tab.
L
The latest data in the unit will be displayed.
3
Perform the desired operation.
L
For details about each function, click [Help].
L
To stop the operation, click [Cancel].
4
[
OK]
L
You can also click [Apply] to continue the next
operation without closing the window.
operation without closing the window.
5
Enter the password (feature #155 on page 56). i
[
[
OK]
L
The new data will be transferred to the unit and
the window will close.
the window will close.
Note:
L
Some of the features cannot be programmed from
your computer.
your computer.
L
For details, see the help file by selecting [p] from
Multi-Function Station.
Multi-Function Station.
L
When another person is adjusting stored data in the
unit, it may be overwritten. Make sure the unit is not
currently being used for the same function.
unit, it may be overwritten. Make sure the unit is not
currently being used for the same function.
9.2.2 Using Device Monitor
You can confirm the setting information and current
status of the unit from your computer.
status of the unit from your computer.
1
Start Multi-Function Station.
2
[
Utilities] i [Device Monitor]
L
The [Device Monitor] window will appear.
3
Confirm the status of the unit.
[
[
Status]: Current status of the unit
Note:
L
Additional information (toner and recording paper
status, unit information, etc.) will be displayed in
[
status, unit information, etc.) will be displayed in
[
Status] tab by clicking [Advanced Information].
L
You can update the status of the unit by clicking
[
[
Refresh].
L
If a printing error occurs, the Device Monitor will start
automatically and display the error information.
automatically and display the error information.
L
For details, see the help file by selecting [p] from
Multi-Function Station.
Multi-Function Station.
9.2.3 Using the web browser (LAN
connection only)
connection only)
You can confirm the setting information and status of the
unit from the web browser.
unit from the web browser.
1
Start Multi-Function Station. i [Utilities] i
[
[
Configuration Web Page]
L
You can also access the unit by entering its IP
address in a web browser.
address in a web browser.
2
Select a category from the menu bar.
[
[
Status]: Toner and paper information, etc.
[
Device]: Current status of the unit, etc.
[
Network]: Network information, etc.
L
When you select [Device] or [Network], you
can change which features are displayed by
clicking the feature tabs at the top of the right
frame.
can change which features are displayed by
clicking the feature tabs at the top of the right
frame.
3
Confirm the status of the unit.
Note:
L
You can update the status of the unit by clicking
[
[
Reload].