Panasonic DPMB300EU 작동 가이드
7. Fax
43
7 Fax
Sending Faxes
7.1 Sending a fax manually
7.1.1 Using the scanner glass
By using the scanner glass, you can send a page from
booklets or small size paper that cannot be sent with the
automatic document feeder.
booklets or small size paper that cannot be sent with the
automatic document feeder.
1
If the {
K} light is OFF, turn it ON by pressing {K}.
2
Set the original (page 20).
3
If necessary, change the resolution and contrast
according to the type of document.
according to the type of document.
L
To select the resolution, see page 43.
L
To select the contrast, see page 43.
4
Dial the fax number.
L
To send a single page, go to step 7.
L
To send multiple pages, go to the next step.
5
Press {
M} to scan the document into memory.
L
Wait until “
SCAN:PRESS OK” “SEND:PRESS
START” is displayed.
6
Place the next page on the scanner glass. i {OK}
L
To send more pages, repeat this step.
7
{
X}
Note:
L
To stop sending, see page 74.
L
You can change the default operation mode (feature
#463 on page 57) and the timer before returning to
the default operation mode (feature #464 on page
57).
#463 on page 57) and the timer before returning to
the default operation mode (feature #464 on page
57).
To select the resolution
1. Press {
G}/{H} repeatedly.
–
“
STANDARD”: For normal-sized characters.
–
“
FINE”: For small-sized characters.
–
“
SUPER FINE”: For very small-sized characters.
–
“
PHOTO”: For photographs, shaded drawings,
etc.
2. {OK}
L
Using the “
FINE”, “SUPER FINE” and “PHOTO”
settings will increase transmission time.
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Press {
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Press {
F} repeatedly. i {OK}
Note:
L
You can save the previous contrast setting (feature
#462 on page 57).
#462 on page 57).
To redial the last number
{R}
L
If the line is busy, the unit will automatically redial the
number up to 5 times.
number up to 5 times.
Note:
L
To stop sending, see page 74.
Reserving the fax transmission (Dual Access)
You can reserve a fax transmission even when the unit is
just receiving a fax or sending a fax from memory.
–
You can reserve a fax transmission even when the unit is
just receiving a fax or sending a fax from memory.
–
Up to 3 reservations when sending
–
Up to 4 reservations when receiving
1. Set the original during fax reception or fax memory
transmission.
2. Enter the fax number using the dial keypad, one-
touch dial or navigator directory.
3. When using the scanner glass, press {
M}. The
unit will scan 1 page. Place the next document on the
scanner glass and press {OK}. Repeat this until all
the documents are scanned, then press {
scanner glass and press {OK}. Repeat this until all
the documents are scanned, then press {
X}.
When using the automatic document feeder,
press {
press {
X}.
L
If the document exceeds the memory capacity, the
reservation for that document will be cancelled. You
must send the entire document manually.
reservation for that document will be cancelled. You
must send the entire document manually.
Printing a sending report
A sending report provides you with a printed record of
transmission results. To print the sending reports, make
sure that feature #401 is activated (page 59). For an
explanation of error messages, see page 76.
A sending report provides you with a printed record of
transmission results. To print the sending reports, make
sure that feature #401 is activated (page 59). For an
explanation of error messages, see page 76.
Printing a journal report
A journal report provides you with a printed record of the
30 most recent faxes. To print it manually, see page 98.
To print it automatically after every 30 new fax
transmissions and receptions, make sure feature #402 is
activated (page 59). For an explanation of error
messages, see page 76.
A journal report provides you with a printed record of the
30 most recent faxes. To print it manually, see page 98.
To print it automatically after every 30 new fax
transmissions and receptions, make sure feature #402 is
activated (page 59). For an explanation of error
messages, see page 76.
{R}
(Redial)
{
OK}
{
K} (Fax)
{
F} (Contrast)
{
G}/{H} (Resolution)
{
M} (Quick Scan)
{
X} (Start)