Panasonic DPMB300EU 작동 가이드

다운로드
페이지 116
10. Help
79
RX MEMORY FULL”
L
The memory is full of received documents due to a lack of recording paper 
or a recording paper jam. Load paper (page 13) or remove the jammed 
paper (page 89).
L
If the PC fax setting (feature #442 on page 62) is set to 
ALWAYS”,
check the connection between the computer and the unit.
check that the computer is turned ON.
L
If the fax preview mode (feature #448 on page 53) is set to 
ON”,
view, print or save the received fax documents, and then erase the 
unnecessary documents (page 53).
turn the setting to 
OFF”. The fax documents stored in memory will be 
printed automatically.
SCANNER POSITION ERROR”
L
There is something wrong with the scanner position. Turn the power switch 
OFF, then ON. If the problem cannot be solved, contact our service 
personnel.
TONER EMPTY”
CHANGE SUPPLIES”
L
The toner is empty. Replace the toner cartridge immediately.
TONER LOW”
CHANGE SUPPLIES”
L
The toner is reaching the end of its life. You will need to replace the toner 
cartridge soon.
TRANSMIT ERROR”
L
A transmission error occurred. Try again.
TRAY #2 LEFT COVER 
OPEN”
L
The left cover of the lower input tray is open (page 74). Close it.
WARMING UP”
L
The inside of the unit is cold. Let the unit warm up. Wait for a while.
Display
Cause & Solution