Panasonic DPMB300EU 작동 가이드

다운로드
페이지 116
10. Help
77
10.2 Error messages – Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display
Cause & Solution
CALL SERVICE”
L
There is something wrong with the unit. Contact our service personnel.
CHANGE DRUM”
L
There is something wrong with the drum cartridge. Replace the drum 
cartridge and the toner cartridge.
CHECK DOCUMENT”
L
The document was not fed into the unit properly. Remove the document, 
and then press {
W} to clear the message. Re-insert the document. If 
misfeeding occurs frequently, clean the document feeder rollers (page 97) 
and try again.
CHECK DRUM”
L
The drum cartridge is not inserted properly. Re-insert it correctly (page 10).
CHECK INSTALL INPUT 
TRAY #1”
L
The paper input tray is not installed correctly. Pull out the paper input tray 
and re-insert it.
Note:
L
#1”: Standard input tray
L
#2”: Lower input tray
L
#1+#2”: Standard input tray and lower input tray
CHECK PAPER”
L
The recording paper size setting and/or the loaded recording paper is not 
appropriate.
The recording paper size is not the same as the size selected for copy.
The recording paper size is not the same as the size selected when 
printing from the PC.
The recording paper size is not the same as the size selected for 
receiving a fax.
Change the recording paper size setting (feature #380 on page 57 o
feature #382 on page 57), and load the appropriate recording paper.
CHECK PICK UP INPUT 
TRAY #1”
L
Recording paper was not fed into the unit properly. Load the paper again 
(page 94).
Note:
L
#1”: Standard input tray
L
#2”: Lower input tray
DIRECTORY FULL”
L
There is no space to store new items in the navigator directory. Erase 
unnecessary items (page 45).
DRUM LIFE LOW REPLACE 
SOON”
L
The drum is reaching the end of its life. Replace the drum cartridge as soon 
as possible.
EMAIL SIZE OVER”
L
When performing scan to email address, the total file size of scanned data 
exceeded the file size limitation. Divide the document into sections.
FAX IN MEMORY”
L
The unit has a document in memory. See the other displayed message 
instructions to print out the document. For fax memory capacity, see page 
99
.
L
If the PC fax setting (feature #442 on page 62) is set to 
ALWAYS”,
check the connection between the computer and the unit.
check that the computer is turned ON.
L
If the fax preview mode (feature #448 on page 53) is set to 
ON”,
view, print or save the received fax documents, and then erase the 
unnecessary documents (page 53).
turn the setting to 
OFF”. The fax documents stored in memory will be 
printed automatically.