Panasonic KXFT938FX 작동 가이드
11. General Information
47
Specifications
11.2 Specifications
■ Applicable lines:
Public Switched Telephone Network
■ Document size:
Max. 216 mm in width, Max. 600 mm in length
■ Effective scanning width:
208 mm
■ Recording paper size:
216 mm
Public Switched Telephone Network
■ Document size:
Max. 216 mm in width, Max. 600 mm in length
■ Effective scanning width:
208 mm
■ Recording paper size:
216 mm
× max. 30 m roll
Approx. 15 s/page (Original mode)
■ Scanning density:
Horizontal: 8 pels/mm
Vertical: 3.85 lines/mm – in standard resolution,
7.7 lines/mm – in fine/photo resolution,
15.4 lines/mm – in super fine resolution
■ Photo resolution:
64-level
■ Scanner type:
Contact Image Sensor
■ Printer type:
Thermal printing
■ Data compression system:
Modified Huffman (MH), Modified READ (MR)
■ Modem speed:
9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback
■ Operating environment:
5
Horizontal: 8 pels/mm
Vertical: 3.85 lines/mm – in standard resolution,
7.7 lines/mm – in fine/photo resolution,
15.4 lines/mm – in super fine resolution
■ Photo resolution:
64-level
■ Scanner type:
Contact Image Sensor
■ Printer type:
Thermal printing
■ Data compression system:
Modified Huffman (MH), Modified READ (MR)
■ Modem speed:
9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback
■ Operating environment:
5
°C – 35 °C, 20 % – 80 % RH (Relative Humidity)
■ Dimensions:
Approx. height 121 mm
Approx. height 121 mm
× width 352 mm × depth 224 mm
■ Mass (Weight):
KX-FT932: Approx. 2.7 kg
KX-FT938: Approx. 2.8 kg
■ Power consumption:
Standby: Approx. 1.5 W (KX-FT932)
Standby: Approx. 1.8 W (KX-FT938)
Transmission: Approx. 13 W
Reception: Approx. 30 W (When receiving a 20 % black
document)
Copy: Approx. 35 W (When copying a 20 % black
document)
Maximum: Approx. 110 W (When copying a 100 % black
document)
■ Power supply:
220 V – 240 V AC, 50/60 Hz
■ Fax memory capacity
KX-FT932: Approx. 2.7 kg
KX-FT938: Approx. 2.8 kg
■ Power consumption:
Standby: Approx. 1.5 W (KX-FT932)
Standby: Approx. 1.8 W (KX-FT938)
Transmission: Approx. 13 W
Reception: Approx. 30 W (When receiving a 20 % black
document)
Copy: Approx. 35 W (When copying a 20 % black
document)
Maximum: Approx. 110 W (When copying a 100 % black
document)
■ Power supply:
220 V – 240 V AC, 50/60 Hz
■ Fax memory capacity
:
Approx. 28 pages of memory reception
(Based on the ITU-T No. 1 Test Chart in standard
resolution, with original mode.)
(Based on the ITU-T No. 1 Test Chart in standard
resolution, with original mode.)
■ Voice memory capacity
(KX-FT938 only):
Approx. 18 minutes of recording time including greeting
message when no documents are in memory
message when no documents are in memory
*1 Transmission speed depends upon the contents of
the pages, resolution, telephone line conditions and
capability of the other party’s machine.
capability of the other party’s machine.
*2 Transmission speed is based upon the ITU-T No. 1
Test Chart with original mode. If the capability of the
other party’s machine is inferior to your unit, the
transmission time may be longer.
other party’s machine is inferior to your unit, the
transmission time may be longer.
*3 If an error occurs during fax reception, such as a
paper jam or if the recording paper runs out, the fax
and subsequent faxes will be retained in memory.
and subsequent faxes will be retained in memory.
*4 Recording time may be reduced by the calling party’s
background noise.
ITU-T No. 1 Test Chart
Note:
L
Design and specifications are subject to change
without notice.
without notice.
L
The pictures and illustrations in these instructions
may vary slightly from the actual product.
may vary slightly from the actual product.
L
The suffix in the model number will be omitted in
these instructions.
these instructions.
L
Most figures shown in these operating instructions
are based on a KX-FT932.
are based on a KX-FT932.
FT932-938FX_PFQX2588ZA-en.book Page 47 Thursday, June 15, 2006 8:30 AM