Panasonic KXTCD220FX 작동 가이드
Answering System Features (KX-TCD220 only)
48
L
You can hang up, or enter your remote
access code again and begin remote
operation.
access code again and begin remote
operation.
Guide to answering
system settings
system settings
If the base unit is reset to its default settings
(page 33), the following answering system-
related settings will be reset.
(page 33), the following answering system-
related settings will be reset.
Changing the number of rings
You can change the number of times the
phone rings before the unit answers calls.
You can select 2 to 7 rings, or “Auto”.
“Auto”: The unit answers after 2 rings when
new messages have been recorded, and
after 5 rings when there are no new
messages. If you call your phone from
outside to listen to new messages (page
46), you will know that there are no
messages when the phone rings for the 3rd
time. You can then hang up without being
charged for the call.
phone rings before the unit answers calls.
You can select 2 to 7 rings, or “Auto”.
“Auto”: The unit answers after 2 rings when
new messages have been recorded, and
after 5 rings when there are no new
messages. If you call your phone from
outside to listen to new messages (page
46), you will know that there are no
messages when the phone rings for the 3rd
time. You can then hang up without being
charged for the call.
1
Press {j/OK}.
2
Select “Answer System”, then press
{>}
{>}
.
3
Select “Settings”, then press {>}.
4
Select “Number of Rings”, then
press {>}.
press {>}.
5
Select the desired setting, then press
{>}
{>}
.
6
Press {ih}.
Selecting the caller’s recording
time
time
You can change the maximum message
recording time allotted to each caller, or set
the unit to greet callers but not record
messages.
recording time allotted to each caller, or set
the unit to greet callers but not record
messages.
1
Press {j/OK}.
2
Select “Answer System”, then press
{>}
{>}
.
3
Select “Settings”, then press {>}.
4
Select “Recording Time”, then press
{>}
{>}
.
5
Select the desired setting, then press
{>}
{>}
.
6
Press {ih}.
Turning call screening on/off
While a caller is leaving a message, you can
screen the call through the handset speaker.
screen the call through the handset speaker.
1
Press {j/OK}.
2
Select “Answer System”, then press
{>}
{>}
.
3
Select “Settings”, then press {>}.
4
Select “Call Screening”, then press
{>}
{>}
.
5
Select “On” or “Off”, then press {>}.
6
Press {ih}.
Turning message alert on/off
This feature alerts you when new messages
have been recorded. The base unit beeps
about once a minute until you have listened
to all new messages.
have been recorded. The base unit beeps
about once a minute until you have listened
to all new messages.
Answering
system setting
system setting
Default
setting
setting
Page
Answering
system on/off
system on/off
Answer On
Remote access
code
code
—
Number of
rings
rings
4 Rings
Caller’s
recording time
recording time
3 Minutes
Call screening
On
Message alert
Off
TCD210220FX(e-e).book Page 48 Tuesday, January 18, 2005 9:04 AM