Kenwood Electronics SLG-7 사용자 설명서

English

¡ Analog input terminal (AUDIO IN)

Connect the stereo mini-plug of the 
audio cable 

1 connected to the 

HEADPHONE terminal of a portable 
audio player or the audio cable 

2 

connected to the LINE OUT terminals of 
a stereo component.

™ USB input terminal (

Connect the USB cable connected to 
a PC.

£ DC input terminal (DC5V)

Connect one of the AC adapters.

¢ Power switch key (POWER)

Press and hold to switch the power 
ON/OFF.

∞ Channel selector key (RF)

Press to switch the channel or ID for 
use in communication between the 
Transmitter and the Receiver.

§ Input selector key

Press to switch between the analog 
input and the USB input. Each time you 
press the key, the input source switches 
in the order of LINE, PHONES and USB.

¶ Power indicator lamp 

(POWER/CHARGE)
The lamp lights green when the power 
is ON. It lights red during recharging 
(with the power OFF) and turns off 
upon completion of recharging. It 
flashes red when the built-in battery is 
nearly exhausted.

• Communication indicator lamp (RF)

The lamp lights when the Transmitter is 
communicating with the Receiver.
It flashes during registration of the ID.

ª Input indicator lamps

The corresponding lamp lights for the 
input source selected with the input 
selector key.

• 

LINE lamp: 

 Lights when the line input is selected.

• 

PHONES lamp: 

 Lights when the headphone input is 
selected. (HEADPHONE)

• 

Off: 

 Both LINE and PHONES lamps turn off 
when the USB input is selected.

¡ ™ £

¢

∞

§

¶ •

ª

B60-5674-00.indb   8

B60-5674-00.indb   8

07.6.8   5:23:16 PM

07.6.8   5:23:16 PM