Kenwood Electronics SLG-7 사용자 설명서
English
9
™ £
¢
∞
§
¶
¡
Receiver
¡ Analog output terminals
(AUDIO OUT)
Connect the RCA pin plugs of the
audio cable connected to the LINE IN
terminals of a home audio component.
Connect the RCA pin plugs of the
audio cable connected to the LINE IN
terminals of a home audio component.
™ Optical digital output terminal
(OPTICAL OUT)
Connect an optical digital cable
(commercially available) connected to
the optical digital input terminal of a
home audio component.
Connect an optical digital cable
(commercially available) connected to
the optical digital input terminal of a
home audio component.
£ DC input terminal (DC5V)
Connect one of the AC adapters
¢ Power switch key (POWER)
Press and hold to switch the power
ON/OFF.
ON/OFF.
∞ Channel selector key (RF)
Press to switch between IDs for use
in communication between the
Transmitter and the Receiver.
in communication between the
Transmitter and the Receiver.
§ Power indicator lamp (POWER)
The lamp lights when the power is ON.
¶ Communication indicator lamp (RF)
The lamp lights when the Receiver is
communicating with the Transmitter.
It flashes during registration of the ID.
communicating with the Transmitter.
It flashes during registration of the ID.
B60-5674-00.indb 9
B60-5674-00.indb 9
07.6.8 5:23:17 PM
07.6.8 5:23:17 PM