Sony XBR-65A1E 사용자 매뉴얼

Installing the TV to the Wall

This TV’s instruction manual only shows the steps on preparing the installation of the TV
before installing to the wall.

Your TV can be mounted on a wall using a Wall-Mount Bracket (not supplied) out of the box
as packaged. If the Table-Top Stand is attached to the TV, the TV may require detaching the
Table-Top Stand; see page 18 (Detaching the Table-Top Stand from the TV).
Prepare the TV for the Wall-Mount Bracket before making cable connections.

This product should only be installed by a professional installer who is trained to determine
the strength of the wall for withstanding the TV's weight. If it is not properly secured during
installation, the TV may fall and cause serious injury. Sony is not liable for any damage or
injury caused by mishandling or improper installation, or installing any other than the
specified product. Your Statutory Rights (if any) are not affected.

For product protection and safety reasons, Sony strongly recommends that installation of
your TV on the wall be performed by qualified professionals. Do not attempt to install it
yourself.

• Follow the instruction guide provided with the Wall-Mount Bracket for your model.
• The length of the screw for Wall-Mount Bracket differs depending on the Wall-Mount

Bracket thickness. Please see below illustration.

• Make sure that the wall has enough space for the TV and is capable of supporting a

weight of at least six times that of the TV.

10 mm - 14 mm

Screw (M6)

Wall-Mount Bracket

TV’s rear cover

• Be sure to store the unused screws and Table-Top Stand in a safe place until you are

ready to attach the Table-Top Stand. Keep the screws away from small children.

Note

• Read the supplied Safety Booklet for additional safety information.
• Be sure to hold the TV while preparing it for wall-mount installation.