Yamaha AVENTAGE RX-A1070 사용자 매뉴얼

En

ADVANCED SETUP menu items

X

Changing the speaker impedance setting 
(SPEAKER IMP.)

Change the unit’s speaker impedance settings depending on the impedance of the speakers 

connected.

Turning on/off the remote control sensor 
(REMOTE SENSOR)

Turn on/off the remote control sensor on the main unit. While the remote control sensor is 

turned off, you cannot control the unit from the remote control.

SPEAKER IMP.

Changes the speaker impedance setting.

REMOTE SENSOR

Turns on/off of the remote control sensor on the main unit.

REMOTE ID

Selects the unit’s remote control ID.

TUNER FRQ STEP

(Brazil, Asia and General models only)

Changes the FM/AM tuning frequency setting.

TV FORMAT

Switches the video signal type.

MONITOR CHECK

Removes the limitation on HDMI video output.

4K MODE

Selects the HDMI 4K (60 Hz/50 Hz) signal format.

DTS MODE

Switches the DTS format notification setting.

RECOV./BACKUP

Creates backup of the settings of the unit, or recovers the settings from 
the backup.

INITIALIZE

Restores the default settings.

FIRM. UPDATE

Updates the firmware.

VERSION

Checks the version of firmware currently installed on the unit.

6 Ω MIN

Select this option when you connect 6-ohm speakers to the unit. You can also use 
4-ohm speakers as the front speakers.

8 Ω MIN

Select this option when you connect 8-ohm or higher speakers to the unit.

ON

Turns on the remote control sensor.

OFF

Turns off the remote control sensor.

 

         8¬MIN

 SPEAKER¡IMP.

 

            ON

REMOTE SENSOR