JBL Commercial JBL CSMA 280 사용자 매뉴얼

To install a full-rack width unit, refer to Figure 2.2.5 and follow the steps below:

1.  Attach the front angle brackets to each side of the front of the amplifier using the 

screws provided.

2.  Attach the rear flat brackets to each side of the rear of the amplifier with the 

screws provided.

3.  Install the unit into the cabinet using the rack mount screws through the front 

angle brackets.  For details of installation in the chassis of the cabinet, refer to 
the user guide of your cabinet.

4.  Align the rear angle brackets with the proper holes at the rear of the cabinet and 

attach using rack mount screws.

5.  With the rear angle brackets to the outside of the flat brackets, attach them each 

using a screw passing through two washers, the rear flat bracket and the rear 
angle bracket as shown in the figure.