Nikon Coolpix W300 사용자 매뉴얼
197
Troubleshooting
Images are blurred.
• Use the flash.
• Increase the ISO sensitivity value.
• Enable Photo VR when shooting still images.
Enable Movie VR when recording movies.
• Use a tripod to stabilize the camera (using the self-
timer at the same time is more effective).
Bright specks appear in
images captured with
flash.
images captured with
flash.
The flash is reflecting off particles in the air. Set the
flash mode setting to W (off).
flash mode setting to W (off).
Flash does not fire.
• The flash mode is set to W (off).
• A scene mode that restricts the flash is selected.
• A function that restricts the flash is enabled.
Digital zoom cannot be
used.
used.
• Digital zoom is set to Off in the setup menu.
• Digital zoom cannot be used with certain
shooting modes.
Image mode not
available.
available.
A function that restricts Image mode is enabled.
Movie options not
available.
available.
The battery temperature is below 0°C (32°F). If you want
to continue recording movies with the size/frame rate set
to d 2160/30p (4K UHD), c 2160/25p (4K UHD),
e 1080/60p, f 1080/50p, h HS 480/4×,
a HS 480/4×, j HS 1080/0.5×, or
Y HS 1080/0.5×, remove the battery from the
camera and warm it up with your palms, etc. before use.
to continue recording movies with the size/frame rate set
to d 2160/30p (4K UHD), c 2160/25p (4K UHD),
e 1080/60p, f 1080/50p, h HS 480/4×,
a HS 480/4×, j HS 1080/0.5×, or
Y HS 1080/0.5×, remove the battery from the
camera and warm it up with your palms, etc. before use.
No sound when the
shutter is released.
shutter is released.
Off is selected for Shutter sound in Sound settings
in the setup menu. No sound is produced with some
shooting modes, even when On is selected.
in the setup menu. No sound is produced with some
shooting modes, even when On is selected.
AF-assist illuminator
does not light.
does not light.
Off is selected for the AF assist option in the setup
menu. AF-assist illuminator may not light depending
on the position of the focus area or shooting mode,
even when Auto is selected.
menu. AF-assist illuminator may not light depending
on the position of the focus area or shooting mode,
even when Auto is selected.
Images appear smeared. The lens is dirty. Clean the lens.
Colors are unnatural.
White balance or hue is not adjusted properly.
Problem
Cause/Solution
A