Canon XA30 사용자 매뉴얼

Using a Memory Card

38

Inserting and Removing a Memory Card

Make sure to initialize (A 38) all memory cards before using them with this camcorder.

1 Turn off the camcorder.

• Make sure the 

POWER/CHG

 indicator is off.

2 Open the double memory card slot cover.

3 Insert the memory card straight, with the label facing 

the front of the camcorder, all the way into one of the 
memory card slots until it clicks.

• You can also use two memory cards, one in each memory 

card slot.

4 Close the double memory card slot cover.

• Do not force the cover closed if the memory card is not 

correctly inserted.

To remove the memory card

Push the memory card once to release it. When the memory card springs out, pull it all the way out.

IMPORTANT

• Observe the following precautions while the ACCESS indicator is flashing. Failure to do so may 

result in permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not remove the memory card.

• Turn off the camcorder before inserting or removing a memory card. Inserting or removing the 

memory card with the camcorder on may result in permanent data loss.

• Memory cards have front and back sides that are not interchangeable. Inserting a memory card 

facing the wrong direction can cause a malfunction of the camcorder. Be sure to insert the memory 
card as described in step 3.

Initializing a Memory Card

Initialize memory cards when you use them with this camcorder for the first time. You can also initialize 
a memory card to permanently delete all the recordings it contains. 

1 Power the camcorder using the compact power adapter.

• Do not disconnect the power source or turn off the camcorder until the initialization is completed.

Operating modes: