Comp X Security Products Inc 421860 사용자 설명서
2
1
1
2
2
3
1
om00991
1.
Retaining ring fastener
2.
Headlamp adjusting screw
3.
Headlamp door fastener threads
Figure 60. Headlamp Retaining Ring: FLHTCUSE3
HEADLAMP ALIGNMENT: FLHTCUSE3
Check Alignment
The automatic-on headlamp feature provides increased
visibility of the rider to other motorists. Be sure headlamp
is on at all times. Poor visibility of rider to other motorists
can result in death or serious injury. (00030b)
visibility of the rider to other motorists. Be sure headlamp
is on at all times. Poor visibility of rider to other motorists
can result in death or serious injury. (00030b)
1.
Verify correct front and rear tire inflation pressure. Refer
to Table 12.
to Table 12.
2.
Place the motorcycle on a level floor or pavement in an
area with minimum light.
area with minimum light.
3.
See Figure 61. Point the front of the motorcycle toward a
screen or wall which is 25 feet (7.6 meters) from where
patch of front tire contacts floor (i.e. - directly below front
axle).
screen or wall which is 25 feet (7.6 meters) from where
patch of front tire contacts floor (i.e. - directly below front
axle).
4.
Draw a horizontal line on screen or wall (1) that is exactly
the same height above the floor as the headlamp center.
the same height above the floor as the headlamp center.
5.
Have a person whose weight is roughly the same as that
of the principal rider sit on the motorcycle seat. The weight
of the rider will compress the vehicle suspension slightly.
of the principal rider sit on the motorcycle seat. The weight
of the rider will compress the vehicle suspension slightly.
166 Maintenance and Lubrication