xG Technology Inc. XMAXBS200 사용자 설명서
xG
Technology
Proprietary and Confidential Information
4
AC Power Connector
AC Power: The BSN200-3S operates on 110V/220VAC, 50/60Hz and single-phase AC
power line. The device is connected to the AC power line using a standard 3-prongs
power connector. This is shown in Figure
.
Figure 3: Power Connector and Rear Power Switch
The power switch on the rear end (near the power connector) is the main switch. This
switch is used to turn ON and turn OFF the device.
The device has a second toggle switch installed at the front of the device. This is shown
in the following image:
Figure 4: BSN200-3S Front View with Front Toggle Switch
Because access to the rear side is sometimes difficult in a typical rack mount installation,
the toggle switch in the front can also be used to turn the device ON and OFF.
the toggle switch in the front can also be used to turn the device ON and OFF.
To turn ON the BSN200, both the rear and front switch have to be in the ON
position (This is labeled ‘1’ on the switch). The BSN200 is turned OFF when
position (This is labeled ‘1’ on the switch). The BSN200 is turned OFF when
either of the switches is flipped to OFF position (labeled as’0’ on the switch).