Shenyang Torch-Bigtide Digital Technology Co. Ltd. 19LCD1928M 사용자 설명서
Last change:
2012-3-1
2012-3-1
User Manual
HL1928M-L/R
Page 3 of
32
1. Application
This high-resolution color display is specifically designed to meet the rigorous
performance standards needed for diagnostic, interventional radiology, and other
medical applications. To guarantee image integrity, features include accurate
signal conversion and a wide range of interfacing options.
medical applications. To guarantee image integrity, features include accurate
signal conversion and a wide range of interfacing options.
Compact design -Low weight and small size with improved performance make the
monochrome flat panel display HL1928M preferable to conventional CRT monitors.
monochrome flat panel display HL1928M preferable to conventional CRT monitors.
Embedded LUT(Look Up Table )-This monitor is factory calibrated to achieve
DICOM part 3.14 compliance and Linear gray level reproduction at the factory set
point. Five different settings are stored within the display.
DICOM part 3.14 compliance and Linear gray level reproduction at the factory set
point. Five different settings are stored within the display.
Screen resolution- HL1928M is equipped with a panel with Super In Plane
Switching technology. The optimal picture resolution is 1280 x 1024 pixels. Video
signals with other resolutions typical to medical engineering are optimally zoomed
in or out to the screen size.
Switching technology. The optimal picture resolution is 1280 x 1024 pixels. Video
signals with other resolutions typical to medical engineering are optimally zoomed
in or out to the screen size.
Fast backlight stability- The luminance stabilization circuit employs a built in
photo sensor to keep the back-light lamps at a constant luminance for consistent
calibration over the life of the display and can control the back light system
automatically to extend the life of the monitor and achieve very short warming up
time.
photo sensor to keep the back-light lamps at a constant luminance for consistent
calibration over the life of the display and can control the back light system
automatically to extend the life of the monitor and achieve very short warming up
time.
Multi-interface for video inputs- Support DVI-D,DVI-A,BNC (combined with
optional BNC cable) video inputs.
optional BNC cable) video inputs.
Digital control interface-The monitor has an asynchronous RS-232 architecture
interface for remote control, such as Brightness, Contrast etc. The protocol of RS-232
is compatible with GE OEC 16 inch CRT monitor.
interface for remote control, such as Brightness, Contrast etc. The protocol of RS-232
is compatible with GE OEC 16 inch CRT monitor.
Left and Right Monitor-The monitor can be supported in pairs. The left monitor has
protective glass in the front and the right monitor has infrared touch screen in the
front.
protective glass in the front and the right monitor has infrared touch screen in the
front.
Remark -All relate to the touch screen only applies to HL1928M-R.